There are standards for every step of the renovation and construction acceptance. Acceptance is done according to the standards, so that your construction will end perfectly.
First, paint
1, the surface of the color is correct and uniform, light and smooth, no sagging, wrinkled skin, too thick, through the bottom, blistering, anti-white and so on.
2. The paint is straight and tidy and the wood oil is out of bounds.
3, latex paint to see at a distance of 1m, no wrinkles.
4, wooden nail coloring to be accurate and smooth. Hardware accessories and glass should be clean.
Second, wallpaper
The wallpaper should be accurate, fit, and free from blistering. According to the regulations, the flower should be cut with a sharp blade, and there should be no tearing of the paper edge.
Third, carpentry
1, the board surface is smooth, no blistering, nesting, burst, warping, deformation scratches, stains, dead sections and so on.
2. The corners are sleek and straight and do not scratch your hands. The interface fits snugly, with a seam of 45°.
3, keel see the light surface neat, do not sting. The back is neat and free from stains.
4. The drawer is closed and smooth. A steady pull is placed on the rest of the four shelves.
5, the door is four positive, no bending. Complete accessories (chain, handle, door stopper, etc.).
Fourth, electrician
1. PVC pipes or black iron pipes shall be used for in-wall wiring. The method of digging the wall to bury the wire shall not be used, and the road box shall be taken.
2, the laying of the open line should be as tidy and beautiful, especially in the corner, the line code distance should be equal.
3, the cabinet wire, in order to try to conceal the principle of every 200mm to use a plastic line code fixed.
4, power more power equipment (such as air conditioning, electric water heaters, etc.) should be a separate circuit wiring.
5. The leakage circuit breaker shall be set as the master switch in the incoming distribution box. Leakage current is 30mA.
6, the electrical device should be firmly connected, good contact, non-live metal part should be reliably grounded, to install the ground.
7. It is advisable to install the switch at a distance of 1.3m from the ground. 0.2m from the door frame. Bathroom sockets should use splash-proof sockets.
8. The weak current system and the electric lighting circuit shall not be laid with the pipe, and shall be installed with the connection box.
Fifth, paving
1. The tile surface should be flat, the angle should be accurate, the edges should be neat, and the edges and corners should be complete.
2, kitchen floor should be suitable for inclined water (2%.), not water, pouring water.
3. After cracking the tile, use a rattan brush to clean the cement mortar. Do not leave cement ash on the brick surface.
Sixth, carpet
1, carpet fight mouth to the pattern and the direction of the blanket hair.
2, with the aluminum side edge, can not be directly hit with a small hammer, you must first use wood blocks and then tap, so as not to cause dents.
Seven, floor, floor wax
Slots shall not be larger than 0.2mm. Padded larch should be used, Benson, Zamu. Specifications must not be less than 45mm x 25mmo. The length of the fixing screw should be 2-2.5 times the height of the damper.
Construction acceptance paint switch socket cement glass floor tile glass brick glass door bathroom door
We diviided the led light according to the using eviiroment. Most of our product is the commercial LED Lighting
Commercial lighting is a term used to describe lighting that is used in commercial spaces, including auto dealerships, distribution centers, churches, factories, offices, and warehouses. Unlike residential lighting, commercial lighting is made to withstand more abuse and has a longer lifespan.
While the focus of residential lighting is often on aesthetics, commercial lighting is task orientated. Commercial lighting systems are designed based on what the application is. For example, in an office-type setting, you may see task lighting, which illuminates specific areas where employees need concentrated light to be able to perform their jobs.
Wall Light,Up Down Wall Light,Mr16 Wall Light,Wall Light Fixture Led
Jiangmen Dilin Lighting High-Tech Co., Ltd. , https://www.jmdilinlighting.com