The summer has come, and the owners who are doing renovations are suffering. In addition to their hard work, many owners have raised questions about summer decoration. After all, such high temperatures and frequent rain, said that there is no impact on the decoration is also impossible. So is the summer decoration good? The answer is both pros and cons. Just pay attention to some details and make full use of your strengths and weaknesses.
1, good summer decoration tiles soaked longer than usual
We know that before laying tiles, we need to soak water. In the summer, the materials are drier than normal. Therefore, for tiles, tiles and other materials that need to be treated with foam water, they must be soaked for a longer time, so that they are fully close to saturation. To avoid sticking to the cement due to water absorption when the tile is tiled, there is no possibility of reducing emptying and shedding.
2, the summer decoration does not need to dry materials do not exposure
Semi-finished wood, wooden floor or freshly painted furniture, do not rush to be exposed to the sun under the sun exposure, should be placed in a dry and ventilated place to dry naturally, otherwise the material is not only easy to deformation, cracking, but also affect the quality of construction.
3, the summer decoration is not good considering the thermal expansion and contraction of windows and doors
Many materials have the phenomenon of thermal expansion and contraction, such as plastic steel doors and windows, sliding doors, etc., so the measurement and installation, the size of the arrangement must be aware of. Because steel is a material that is greatly affected by temperature, if the size is just right, it will have gaps and deformations due to the decrease in temperature in the winter, so there should be a slight surplus in size.
Decoration construction knowledge construction installation
ASTM A554 Decorative Stainless Steel Pipes is the main tubing line for a piping system. Generally, ASTM A554 Decorative Stainless Steel Pipes are made in stainless steel 304 and 316L, but we provide other grade too such as hastelloy C22, 316Ti, Titanium and nickel alloy etc. Kaysen offer both Sanitary Seamless Tubes and Sanitary Welded Tubes to ASTM A270, ASTM A249, A269, ASTM A554, DIN11850, and size is up to 12″. Inner and outer surface is polished to meet the high purity requirement of hygienic industries. Kaysen is ability to supplying qualified ASTM A554 Decorative Stainless Steel Pipes comply to your your condition and FDA,GMP requirement.
ASTM A554 Decorative Stainless Steel Pipes - Polished Stainless Steel Tube – Stainless Steel Hygienic Tubes
Material: SS304, SS316L, EN 1.4301, EN 1.4404, etc
OD diameter: 1/2" - 12"
Thickness: 0.5mm - 6mm
Standard: ASTM, JIS, DIN, JIS, SUS, GB
Length: 6m or customer made
Tolerance: OD. ±0.2mm; Thickness: ±0.02mm; Length: ±0.5mm
Surface Treatment: Matt Finish or Mirror Finish (320# 400# 600#) etc
Application: Boiler, heat exchanger, construction, hygienic, pharmacy, power, petrochemical
Strength:
Heat Treatment of solution annealing for the sanitary tubings and fittings are available
High precision on dimension and wall thickness
Both seamless and welded sanitary tubings are available
Length is up to 12 meters.
Min. order quantity of sanitary tubings is from 300Kgs.
Offer industrial pipe and tubes according to order.
PMI test to verify material grade.
Visual and surface 100% examination before shipment.
End protected for shipment.
ASTM A554 Decorative Stainless Steel Pipes
ASTM A554 Decorative Stainless Steel Pipes,A554 Square Pipes,Stainless Steel Decorative Pipes
Kaysen Steel Industry Co., Ltd. , https://www.chinasanitaryvalve.com