RY air-cooled heat transfer oil pump structure RY air-cooled heat transfer oil pump has good performance and advantages, can play an important role in the use of air-cooled high temperature heat transfer oil pump using advanced technology and process for production, high efficiency, In the hot state of long-term stable operation without leakage, no additional cooling system, the use of safe and reliable, and other features in our heating medium heating system has been widely used, has entered the petroleum, chemical, rubber, plastics, pharmaceuticals, textiles, Printing and dyeing, road building, food, etc. Air-cooled high-temperature heat-conducting oil pump is mainly used for conveying weakly corrosive high-temperature liquid without solid particles, the use temperature ≤ 370 ℃, is an ideal circulation pump. The pump is widely used in paper Lunch box high temperature stereotypes, dynamic vulcanized tire and reclaimed rubber machinery, flat vulcanization, rubber, drying, feed drying, printing and dyeing, chemical industry, plywood production, waterproofing membrane production, asphalt heating, noodle drying and other industries. Conductive oil pump in a wide range of different industries and the use of promotion, good performance and advantages to promote the use of heat-conducting oil pump in the industry, in different environments. Air-cooled high Thermal conductivity of the oil pump has good advantages and features, the use of advanced technology for the production. Here's about the pump processing technology and superiority: (1) RY series of air-cooled heat transfer oil pump is based on the digestion and absorption of foreign oil pump developed on the second Substitute products, the basic structure of the single-stage single-suction cantilever foot support structure, the import of hot oil pump axial suction, the export center for the vertical upward, and the motor with the base. (2) using packing and mechanical seal phase In combination, the packing is filled with a high temperature resistant filler and has good thermal adaptability, while the mechanical seal is made of hard alloy with high mechanical strength and good wear resistance, which ensures the sealing performance under high temperature conditions. ) Third-generation polytetrafluoroethylene (referred to as PTFE) to do lip seal, the sealing performance has been a leap forward than the rubber seal reliability increased by 25 times, corrosion resistance is extremely strong. (4) RY-type heat transfer oil pump support Adopting the structure of double-end ball bearing support, the front end is lubricated with grease, the rear end is lubricated with grease and there is a guide pipe in the middle for observing the sealing condition and recovering the heat conducting oil at any time. (5) , Has changed the traditional water cooling structure, so that the structure is simple, small size, saving running costs, good performance, reliable use. The structure and performance of air-cooled high temperature heat transfer oil pump to promote its widely used in different fields and industries and Promote, able to withstand high temperatures, with good sealing performance at high temperatures, is a major leap in the pump industry.
Heilongjiang Junhe Building Materials Technology Co., Ltd , https://www.junhejiancai.com