In this paper, the influence of the manufacturing process of the elbow on the performance of the X70 steel elbow is systematically studied. By using different heat treatment processes for the bent pipe material, combined with the trial production test results, a suitable bending process is obtained: the bending temperature is 900~1050 °C, the cooling mode is single-sided forced water cooling, and the suitable tempering temperature. It is 450~500 °C (Ceq≤0·39%) and 500~550 °C (Ceq0·39%). The inspection results of the first batch of 50 batches of 1016mm×17·5/21/26·2mm 三ç§1016mm×17·5/21/26·2mm, which were bent by the main pipe, and the first batch of 50 batches of 1016mm×21mm elbows were all shown. The X70 steel pipe bending process we developed is suitable.
The LED emergency driver for panel can be customized from 3W-100W with half power emergency output for emergency lighting 60-300mins. Automatic lighting up when main power failures. Suitable for LED fitting with external led driver. With internal or external lithium battery back up. Widely using for office, building, warehouse, school, hospital, workshop etc.
Emergency Led Driver,Emergency Backup Driver for led,Emergency Light Driver,Emergency Driver For Panel,led light emergency power supply
Foshan Nai An Lighting Electric Co.,ltd , https://www.twinspotlights.com