With the advent of the heating season, "running water" incidents have occurred repeatedly. Even if you look at your own home and pay attention to it, if your neighbor’s home is “splendid,†you may also be flooded. If there is a serious water leakage accident, the worst part of the home is probably the floor. In case we unfortunately encountered this situation someday, could thousands of dollars or even tens of thousands of yuan be spent on floors that were scrapped? Don't worry, you see what the experts say.
Soaking Cause Analysis
At present, common households suffer from "floods" mainly due to pipeline leakage. According to their severity, they can be divided into:
1. A large area of ​​water soaked: water pipes cracked, heating water running.
2. Local soaking water: water pipe drip, hidden pipeline seepage, heating pipe drip, drinking fountain leaking, bathtub leaking and so on.
Soaking reaction
1. The seams at the floor seam are deformed.
2. The skirting board is deformed and bulging.
Treatment plan
According to Zhang Peng, the sales manager of XX Flooring's after-sales service department, if consumers encounter similar situations, they must fully preserve the evidence according to the following methods. While minimizing the losses, they also provide favorable conditions for the division of responsibilities and claims in the future.
1. Find and cut off water sources in time.
2. Clean the floor water.
3. Inform property and related manufacturers in a timely manner.
4. Photographed on-site to provide evidence for disputes.
Floor maintenance
1. A large area of ​​water soaking: a large area of ​​floor water due to various reasons,
And when the amount of water is relatively large, the site is cleaned and at the same time the customer of the flooring manufacturer is notified and the floor is removed within the shortest possible time.
Because rooms other than bathrooms and kitchens are generally not waterproof, it is necessary to clean up the water on the ground as soon as possible so as not to bubble downstairs and cause greater losses. The floor factory installation workers dismantle the floor. Under normal circumstances, the water-soaked floor will be deformed to varying degrees, and serious ones will not be able to continue to be used normally.
2. Local soaking water: Cut off the water supply and clean up the water on the ground in time to observe whether there are obvious changes in the floor. There is a noticeable edge reaction and the floor maker can be notified to make a partial replacement. The workers will perform partial removal according to the site conditions and calculate The cost of floor area accounting required for maintenance.
3. Floor foam water maintenance is generally a charge item, mainly including: labor costs, floor and related materials, materials, freight.
4. Partial floor replacement: Before the workers come to the door, they need to check the stock and batch conditions of the floors that need to be changed, because only the floor with the same floor color and specifications can be used, otherwise it cannot be repaired.
5. Overall replacement, partial replacement of the floor: It is best to dry the ground for about two weeks while maintaining normal ventilation. After the ground is dry, reinstall it.
Accessories selection
After all, it is passive to reduce losses. It is a good choice to plan ahead.
The switches, valves, etc. involving hot and cold water pipes should be inspected frequently. For homes that use heated floor heating methods, the high temperature resistant layer is more important for waterproofing. Many businesses on the market use plastic films made of recycled plastics, which will not only emit hazardous substances at high temperatures, but also have very low temperatures. If the high-temperature thawing melts and breaks, the protective film will lose its function. Once there is a leak in the heating pipe, the loss can be serious. Therefore, it is recommended that you choose a regular accessory product when installing flooring and plumbing equipment.
Responsibility
1. The developer is responsible for leaks in the unmodified pipeline.
2. The leakage of the pipeline laid or modified by the decoration company is the responsibility of the decoration company.
3. The direct responsible person is responsible for the leakage of pipes caused by the installation of the equipment.
4. The drinking fountains, fish tanks, etc. are leaking under normal conditions of use. The responsible manufacturers are responsible for quality problems.
5. Responsible manufacturers shall be responsible for water damage caused by water equipment such as heating and sanitary equipment or quality problems.
Nature Flooring Del Floor Heating Home Improvement Heating Switch Room Decoration Looking for fitment company How does the bathroom waterproof bathroom overall bathroom door bathroom leaking
Toilet seat bolts,Toilet seat screws,Toilet lid screws,Toilet lid bolts,Toilet bowl seat screws
Yangzhou Mifen Import and Export Co., Ltd , https://www.fanmitrkwc.com