Daily maintenance methods for packaging equipment The daily maintenance of precision machines has the equipment cleaning, fastening, adjustment, lubrication and anti-corrosion work.
Daily maintenance includes routine maintenance, regular maintenance and special maintenance. Regular maintenance can be divided into three types: first-grade maintenance, second-level maintenance and three-level maintenance. Special maintenance can be divided into season maintenance and deactivation maintenance.
Routine maintenance of precision equipment packaging focuses on cleaning, lubrication, inspection and tightening, and routine maintenance is required as required during and after work.
The first-level maintenance work is carried out on the basis of routine maintenance. The key work is to lubricate, tighten and inspect all relevant mechanical equipment parts and their cleaning work.
The secondary maintenance work focuses on inspection and adjustment. Specifically check the mechanical equipment engine, clutch, transmission, transmission components, steering and brake components.
The third-level maintenance focus is to detect, adjust, troubleshoot and balance the wear of each component. Diagnose and condition check the parts that affect the performance of the equipment and the parts with fault signs, and then complete the necessary replacement, adjustment and troubleshooting. Seasonal maintenance means that the packaging equipment should focus on the power system (engine), the conveyor system (spiral shaft and belt conveyor), the air pressure system (check the lubrication and sealing of the air compressor), and the control system before entering the summer and winter. The maintenance of the special electromechanical control cabinet, this part needs to be completed under the guidance of the after-sales engineer, and the inspection and repair of the components.
Discontinued maintenance means that when the packaging equipment needs to be deactivated for a period of time due to seasonal factors (such as winter vacation), it should be cleaned, plasticized, matched, moisture-proof and anti-corrosive.
Concerned about surprises
Label: Daily maintenance methods for packaging equipment
Previous: Ultra-pure water equipment ion exchange resin maintenance Next: Twin-screw extruder adopts ordinary curing and regular maintenance
It has strong corrosion resistance, strong adhesion, high hardness, wear resistance, salt spray resistance, acid and alkali resistance, high gloss, high solid content, high fullness and so on.
Characteristics: The characteristics of solvent-free epoxy coatings are as follows: solvent-free epoxy coatings are environmentally friendly, solvent-free paint film thickness 200-300 microns, corrosion resistance and so on. The disadvantage is that the use time is too short, the paint film is more brittle and the viscosity is large. No volatile organic solvent, solid content up to 100% room temperature curing 5-45C film adhesion, excellent mechanical properties, convenient construction. The film has excellent water resistance. Due to the use of special curing agents, the cured film is non-toxic and does not pollute drinking water and food.
Solvent-Free Epoxy Self-Leveling Primer ,HDPE Water Supply Plastic Pipe ,Hdpe Pipe For Water Supply,Black Water Supply HDPE Pipes
Jiangmen Kasole Building Materials Co., LTD. , https://www.kasole-paint.com