In fact, no matter what kind of product, do a good job of inspection before use, which will help better application. The same is true for power buses. Before using it, do some necessary checks to prevent it from happening. If you want to know that the bus is used without inspection, the impact is very bad. So what are the checks that need to be done?
Check the track deviation
When using busbars, make sure that the track fits. Because of the deviation of the track, various troubles will inevitably occur, and in serious cases, there will also be a safety accident. Therefore, before using the bus, be sure to check the track deviation. In particular, it is necessary to see if there are obvious deviations or misalignments, which should be resolved in time if found. It is worth noting that, in addition to doing a good job of checking the track deviation before use, daily regular inspections are required to achieve true prevention.
To check the stability of operation
It is necessary to know that the power bus can only safely deliver electricity to where it is needed if stability is ensured. But if it is not stable enough, the impact is considerable. Therefore, when it is checked that the operation of the bus is unstable, it must be analyzed, judged and resolved in time, so as to reduce the occurrence of more serious consequences.
Check the connection of each component
After long-term use of the bus, it is inevitable that some connection parts will show signs of loosening, which will undoubtedly increase the safety hazards of people's lives. Therefore, before use or daily, all connection parts should be checked. In particular, if the connection parts are different, they must be solved by reasonable methods.
In short, doing all inspections before using the power bus can bring many benefits. Of course, there are many aspects to be checked, but no matter what aspects, the staff must take it seriously before they can safely use the power transmission device.
Steel Belt Traction Machine
Steel belt elevator advantages
1. Steel belt traction elevator, can maximize the utilization rate of well, reduce the top height, reduce pit depth.
2. Maintenance-free: the inner steel belt is multi-strand high strength steel wire, the surface is polyurethane polymer material, without lubrication.
3. High life: the life of steel belt is 2â€3 times that of traditional steel wire rope.
4. High efficiency: the steel belt and wheel contact area is larger, more efficient and energy saving.
5. Noise reduction: steel belt and wheel friction noise is less.
6. Because the diameter of the main wheel and the regulating wheel of the steel belt becomes smaller, there is no need for Angle change, which is beneficial to prolong the life of the steel belt and smooth operation.
Notes for installation of steel belt elevator
1. High levelness is required for the steel belt host due to the larger width of the traction wheel.
2. At the same time, ensure the levelness of the main wheel and the regulating wheel in all directions to prevent the deviation of the steel belt.
3, keep the cleanliness of the steel belt.
4, FAXI steel belt host specially equipped with McGowdy steel belt, pay attention to the rough surface of the steel belt and traction wheel contact when installing.
5. Confirm the consistency of the tension force of each steel belt
Belt traction machine,Steel belt traction machine,gearless traction machine,Belt motor,gearless motor
Suzhou Keffran Parts Co.,ltd , https://www.keffran-elevatorsmart.com
