Office furniture maintenance classification
One. Desks and cabinets:
1. Desktop: Desktop stains can be wiped with a soft cloth stained with oil, which can restore the brightness as new, especially the tape marks have high viscosity and are not easy to wipe. The stain removal oil is the best cleanser, but it is not good for the skin. Long-term contact should be avoided.
2. Body: If the drawer does not slide smoothly, you can purchase the WD-40 lubricating fluid spray rail at the hardware store. If the drawer surface of the drawer is tilted, one third of the drawer can be pulled out, and the cabinet body can be pressed down by the left and right sides to restore the flat appearance of the drawer.
two. screen:
1. Cloth panel: The most common is the dirt of the screen cloth panel. A small amount of stains can be sprayed with a 3M foam cleaner for about 10 seconds, and then wiped with a clean soft cloth. Do not wipe with degreased oil. .
2. Glass panel: It is easy to leave rags when wiping. It is extremely difficult to clean. You can wipe it with a soft cloth dipped in water and wipe it with an old newspaper to keep it shiny as new, or wipe with a soft cloth dipped in oil to avoid leaving rag .
3. Table board: The cleaning process is as described in the table above.
4. Paint: when the paint is dropped due to strong collision, if there is only a small place, it can be modified with a black singular pen.
three. sofa:
1. Cloth sofa: The processing method is like a screen cloth panel.
2. Cowhide sofa: Do not use irritant detergents, solvents, soapy water, benzene, rosin oil, etc. during maintenance. It is necessary to prevent the pores of the leather from being blocked. During daily maintenance, sponges can be dipped in cleaning fluid in a circular motion. Wipe, do not rub hard, and then dry with a wool cloth, can be done once a month, can make the surface bright and new. For regular maintenance, you must first use the above-mentioned weekday maintenance methods, and then use a soft cloth dipped in a little maintenance oil (no need for too much, and should be replaced on the surface of the cloth). Evenly apply it to the leather. Wipe the skin to make it shiny. The leather should not be wiped with water because it is afraid of moisture and sunlight. If it gets wet, it should be dried immediately, otherwise it will crack for a long time. Regular maintenance is recommended every two seasons.
four. office chair:
1. Cloth cleaning and leather cleaning: follow the sofa maintenance steps above.
2. There is abnormal sound when tilting: WD-40 lubricant can be used to spray the shaft contact or spring.
3. Easy to dump: adjust the tilting tension adjustment knob to fit the tightness of your body shape, don't be too loose, it is easy to cause the risk of dumping.
4. Chair wheel: There are two kinds of wheelchairs, one is nylon rigid wheelchair, suitable for soft ground use, such as carpet, and the other is PU soft wheelchair, suitable for hard ground use, such as plastic floor, Material such as marble floor and wooden floor. Because the wheel of the chair rubs the axle on the ground, it is easy to get swarf fibers. It is advisable to remove the swarf on the wheel regularly and use anti-static spray to protect the wheel to ensure smooth sliding.
Seven taboos of office furniture maintenance
1. Don't drag or pull hard when carrying, you should lift it lightly; when placing it, it should be placed flat and stable. If the ground is uneven, the legs should be cushioned to prevent damage to the mortise structure;
2. Do not expose the furniture to the sun, and avoid placing it in too dry places to prevent the wood from cracking and deforming
3. Do not place the furniture in a very humid place, otherwise the wood will swell when wet, and it will be rotten for a long time, and the drawer will not open;
4. Do not press heavy objects on top of furniture such as large wardrobes, so as to prevent the cabinet door from protruding and the cabinet door is not closed tightly; also avoid too much clothing stacked, and avoid exceeding the cabinet door to prevent the cabinet door from deforming;
5. Do not rinse with water or wipe the furniture made of plywood with a rag. Never immerse it in alkaline water to prevent the plywood from loosening or degumming;
6. Do not use pigments and putties that are different from the original paint color of the furniture and mix them into the cracks of the furniture to block them, so as not to leave scars;
7. Do not use alkali water or boiling water to wash furniture or place hot objects such as high-concentration alcohol, banana water and fresh boiling water on the table to prevent damage to the paint surface.
Coil Decoiler& slitting & shearing machine
SF is focus on quality and company's image. We win market with good quality and service. The company has already passed International Quality Management System ISO9001:2008 certification for many years and also got the CE certificate, smoothly got the title of High and New Tech Enterprises. And has more than ten own intellectual property rights and patent technology. We have own import and export right. Our products exported to Russia, South Asia, South east Asia, Middle East, South America, Africa, Australia, Eastern Europe etc.
Slitting Machine,Coil Slitting Machine,Steel Coil Slitting Machine,Slitting Machine For Steel Coil
Shandong EN FIN CNC Machinery Co., Ltd , http://www.sdfincnc.com