Epoxy floor paint I believe we all understand that no matter how large the area, there will be no joints, but also has strong adhesion, friction and other characteristics. At present, this kind of material has been accepted by many domestic manufacturers and users, but when this material is used in construction, there will be some problems, such as the problem of incomplete hardening of epoxy floor paint. The following small series introduces epoxy floor paint construction technology and epoxy floor paint maintenance.
Epoxy floor paint construction process
1, floor surface treatment
The new construction floor must be constructed after curing, generally about a month. Then remove the surface cement laitance, old paint, and attached debris.
2, coating closed coating
When cleaning the ground, you can use high-pressure airless spray or roller coating, and then partially apply a brush to make up the coating. The excess surface air on the surface can be ground before the next process.
3, batch scraper
After finishing the ground, you can use 100 to 200 mesh quartz sand to scrape, as the first putty, and then use 200-270 mesh quartz sand scraper, as the second putty, is mainly used to enhance the surface wear And flatness.
4. Finishing floor middle layer
For the polished surface, the intermediate layer can be painted with epoxy floor paint. In the large area construction, it is best to use high-pressure airless spraying, and the spraying pressure is 20-25Mpa.
5. Finishing floor surface
After the intermediate layer is dried, the epoxy floor coating can be applied. When the coating is applied again, scraping or high-pressure airless spraying is used. Preferably, high-pressure airless spraying is preferred.
Epoxy floor paint maintenance
1. After construction, ventilation and fire prevention measures must be strengthened during maintenance.
2. During construction, production personnel are prohibited to wear leather shoes with iron nails to walk on them.
3, construction tools must have a fixed frame placed, prohibited with sharp-angle metal parts and other objects hit the ground, this will cause damage to the floor paint.
4. If the workshop is to use lifting machinery, the supporting points that touch the ground should be covered with thick rubber and other soft materials. It is forbidden to use iron pipes or metal to drag the equipment on the ground.
5. When electric welding is performed in the workshop, electric welding sparks are splashed onto the ground to apply asbestos cloth and other refractory materials to prevent burning of paint.
6, if there is floor damage to be repaired in a timely manner to prevent oil damage penetrated into the cement, causing the paint off.
Editor's summary: About the epoxy floor paint construction process and the maintenance of epoxy floor paint is introduced here, I hope to be helpful to everyone, want to know more relevant knowledge can focus on this site information.
Epoxy floor paint
Ultra Thin Hollow Hydraulic Torque Wrench
Ultra Thin Hollow Hydraulic Torque Wrench,Ultra Thin Hollow Hydraulic Wrench,Ultra Thin Hollow Torque Wrench,Ultra Thin Hollow Hi Force Torque Wrench
Taizhou Juhuan Lifting Protection Equipment Co., Ltd , https://www.jsjoba.com