The bathtub can be divided into acrylic bathtub, steel bathtub and cast iron bathtub according to its material. The life of the bathtub is closely related to the maintenance.
Use a sponge or flannel when cleaning the acrylic bathtub. Do not use coarse cloth or scouring pad. Do not use any cleaning agent containing granular objects. It is best to avoid direct sunlight and high temperature cigarette butts. Use a mild detergent (such as dishwashing detergent), do not use abrasive cleaner. Acrylic bathtubs can also be cleaned with glass water. The cast iron bathtub should be thoroughly rinsed with clean water after each use and wiped dry with a soft cloth. If you encounter stubborn stains, use a small amount of abrasive cleaner to clean. Clean the bottom non-slip surface with a soft nylon brush. Do not scrub with a steel ball, wire brush or abrasive sponge.
The jacuzzi system should be flushed twice a month. Adjust the nozzle clockwise to the fully closed position to prevent air leaks. Inject warm water into the bathtub to 2 inches above the highest nozzle, or leave the water in the bathtub after use. Add two tablespoons of low foaming powdered dishwashing detergent and a small amount of household bleach to the water. Turn the jacuzzi on for 5 to 10 minutes, then close, drain the water, and then rinse the bathtub surface with water. When the bathtub is in a hot and humid state for a long time, it will also breed a lot of bacteria. Sometimes it is cleaned and the surface looks clean. In fact, there are still many bacteria. It is recommended to wipe the surface of the bathtub with boiling water regularly. Do not use disinfectant water casually, because disinfecting water does not necessarily kill mold and fungi.
Office Paper Cutter Utility Knife,Hight Quality Utility Knife,Best Utility Knife
Shangqiu Acer Measuring Tool Co.,Ltd. , https://www.acertoolshn.com