When it comes to how the plaster line is done, some people may say that this is the life of the decorator. We don’t need to know. If everyone thinks like this, then you are really out. Now most of the family will promote themselves at home. Installation of the ceiling, so some things about the ceiling must be understood, today Xiaobian will solve problems for everyone, for everyone to introduce how to do the plaster line and other related content!
First, how to do the plaster line?
1. Selection and cleaning of plaster line moulds
It is very important to use high-quality molds before this. The mold pattern should be clear, the degree of solidity should be high, smooth and flat. Careful cleaning of the mold with the mold paste must ensure that the interior of the plaster line mold is clean and carefully clean the inside of the pattern. If the plaster line mold is severely deformed due to aging, it can be immersed in high temperature water, where it is emphasized that the immersion temperature discomfort may cause permanent damage to the mold.
2, fixed plaster mold
First of all, the mold should be clamped with a strong clamping force, and the level of the glass table or the marble countertop should be preserved when clamping. Otherwise, the plaster line will cause the finished product to have a gap that is often said to be "missing".
3, gypsum powder pulping
Choose the appropriate spoon. The size of the spoon should be proportional to the width and thickness of the gypsum line. The wider and thicker the line, the more gypsum powder you need, and the larger the spoon you choose. Add water to the spoon and sprinkle with the gypsum powder.
4, filled with gypsum slurry
Evenly apply the adjusted gypsum slurry into the plaster line mold until the gypsum slurry completely covers the front surface of the mold, and the thickness reaches 5mm or more. Then add fiberglass or mesh cloth, add a firm thin rope at one end, and then Cover a layer of gypsum slurry and then scrape it with a special mold scraper. Here we emphasize that the thickness must be up to standard, do not cut corners, not worth the loss, and eventually lead to easy breakage or deformation when demolding.
5, the paste line demoulding
After the gypsum line is basically solidified, remove the mold clamp, gently release the mold, use light force, and pay attention to the hand cleaning, do not leave dirt on the white lines.
6, drying
Hang the molded plaster line vertically (the rope added in the fourth part), and if it is a curved plaster line or a shaped plaster line, it should be placed flat and air-dried.
Second, install the decoration gypsum board ceiling partition wall matters needing attention
In many places, safety considerations need to be taken into consideration, such as the connection of some basic structures of the skeleton must be strong, and whether there is any looseness in the inspection. Post and fix the cover panel with nails or screws. The outer surface should be flat. The covered cover panel should not be delaminated. The appearance of gypsum board, plywood and fiberboard should not be contaminated, cracked, edged, cornered or hammered. The gypsum board should be laid in the correct direction, the device is firm, the joints are dense, lubricated and the surface is flat.
Through the above introduction, I believe that everyone has a certain idea and understanding of how the plaster line is made. The above is all about how to do the plaster line. I hope this article can help everyone! For more information on decoration, please continue to pay attention to the decoration home network!
More related wonderful reading:
What are the plaster line brands? Plaster line brand list
What types of plaster line TV wall? The benefits of plaster line video wall
How to decorate the plaster line? Main points of plaster line decoration
What are the characteristics of the plaster line? What kind of plaster line is good?
Plaster line effect diagram plaster line ceiling effect diagram
How to choose a plaster line? Gypsum line purchase points
multi function shower,shower panel,thermostatic shower valve kit,thermostatic shower mixer
Guangdong Kinen Sanitary Ware Industrial Co.,Ltd. , https://www.kinengroup.com