Whether there are obvious gaps and uneven ground level, the test ground level is to measure the horizontal error between the floor and the ground in the doorway farthest from the gate. The method of measurement If you do not bother, then the method is quite simple. Go to the hardware store and buy a small transparent water pipe, about 20 meters in length, then fill it with water. First draw a sign 0.5 meters or 1 meter off the ground at the door. Then adjust the level of the water pipe to the height of this sign and find someone to fix it in this position. Then move the other end of the hose to the room furthest from the door. Then look at the height of the water pipe at the place, and then make another sign. Then use a ruler to measure how high this mark is off the ground. The difference in these two levels is the difference in the level of the house. You can also use this method to analogically measure the level difference in the entire house. In general, if the difference is about 2 cm, 3 cm is acceptable. If you go out of this range, you have to pay attention.
Is the ground level? Splash a layer of water on the ground so that the water does not converge towards any one party.
Wall, ceiling, floor
With or without tilt, bending
Whether there is a bulge or depression; a flashlight shines
Is the wall level?
Is there a flower on the wall?
Whether the bearing walls, beams, and columns meet the design specifications, if the cracks in the bearing wall penetrate the entire wall and pass through the back, it indicates that the house has hidden dangers and whether the steel bars are exposed.
Tap with a wooden stick to see if there is no sound
Whether the wall has obvious color difference
Whether the yin and yang angles are straight; use triangle ruler
Whether the wall and the floor have kicks
Whether the kicking is too little can protect the wall from contamination
Whether the skirting board is smooth
Whether there are cracks or brush marks, if the crack is at an angle of 45 degrees to the corner of the wall or perpendicular to the beam, the settlement of the house is serious and there are structural quality problems.
There are no water stains, cracks
Whether there is a small crack in the ceiling
Note that there is no air conditioning hole in the relevant location
Check whether there is lime “explosive electricity†on the wall. This is because lime has not matured enough or there is too much sediment or uneven mixing in the cement. It can be used to knock “blast points†with iron, if a large area is found. The looseness and detachment are also quality issues, which will cause great troubles for the buyers' residence and decoration and cannot be ignored.
Entrance decoration restaurant decoration house interior decoration design cement
Profile Handle For Furniture Fronts
How to choose the Furniture Fronts Handle,Aluminium Handle profile for kitchen,door handles for aluminium front doors,kitchen aluminum handle profile,aluminium cupboard handles.
What materials can I choose for the cabinet handle? Which is good?
At present, plastic, zinc alloy, aluminum alloy, copper, stainless steel, gold and silver are commonly used in the market (these two kinds are basically useless unless the family really has no money to spend)
Plastic handle should be the cheapest. It's rare to know much about it, and it's not recommended to buy it. After all, it takes several years to install a handle, or it's more reliable to buy a metal handle. People of insight are welcome to add it in the comment area.
Zinc alloy is the most common material in handles. More than 80% of the handles you see in the market are made of this material. Why do you ask? Most of the handle manufacturers produce zinc alloy handles. The price of raw materials is medium, not as expensive as copper, which is easier to process. After electroplating, it is very beautiful and has enough weight, So consumers are willing to buy this high-quality and cheap product.
Aluminum alloy handle is popular in recent years. It is cheaper than zinc alloy and has low material density,.
Copper handle is the best material, which can be said to be the standard configuration of high-end handle. American, European, light luxury and other cabinets can be selected. It has a large density and heavy weight. It feels very textured, and its appearance and color are also very beautiful. In ancient times, the noble with status was equipped with a copper handle as standard. Of course, the price is also expensive. The raw materials are more than twice that of zinc alloy and aluminum alloy, so the finished products will only sell more expensive!
The style of stainless steel handle is relatively simple. Due to processing and market demand, there are few styles of stainless steel handle, and there is basically only one color, that is, wire drawing texture. We rarely buy it at home, and basically export it abroad.
The handle is bought according to the place of origin. The handle in Shanghai, Shenzhen and Foshan is better than that in Wenzhou. The electroplating process in Guangdong is really good. The price of the handle in these places is more than twice that in Wenzhou!
Profile Handle For Furniture Fronts,Aluminium Cupboard Handles,Kitchen Aluminum Handle Profile,Aluminium Handle Profile For Kitchen
GuangDong XinCheng Material CO.,LTD , https://www.xin-alu.com