Wall cabinet installation tips

The closet cabinet is a kind of furniture fashion and it is one of the standard configurations of home decoration in Europe and America. It is not only beautiful in appearance, but also can make full use of space. The internal grid can adopt various combination methods according to individual requirements, which is an ideal choice for modern living rooms. Want to have a set of thoughtful cabinets, in addition to the choice of the quality of the closet door brand, some necessary preparations need to pay attention:

First, the cabinet of the wall cabinet can be either a wall or a mezzanine, which not only ensures the efficient use of space, but also does not deform. But be sure to do the top and bottom level, both sides of the vertical, if there is an error, the required height difference between the left and right sides of the hole is less than 5mm, the bottom wall of the closet door can be adjusted through the debugging system to make up for errors.

Second, the installation of partitions at home cabinets generally has a drawer design, in order not to affect the use, design the position of the drawer should pay attention to: do three sliding doors should avoid the intersection of two doors; do two sliding doors should be Placed on the side of a door; when the folding door is done, the drawer should have a 17cm gap from the side wall.

Thirdly, when the track is installed as a cabinet body, it is required to reserve the size of the track. The reserved dimensions of the upper and lower tracks are 8 cm for the folding door and 10 cm for the sliding door.

Fourthly, the installation of closet doors is generally completed by professional personnel. The steps are: First fix the top rail, the front rail surface is in the same plane as the cabinet surface, and the upper and lower rails are laid flat in the reserved position. Then the two doors are loaded into the track, and the verticality of the door is measured with a horizontal ruler or a ruler, and the positions of the upper and lower rails are adjusted and fixed; once again, the door body is parallel to both sides, and the door body can be adjusted by adjusting the bottom wheel. , reach the border and the level of both sides; Finally, the anti-jump device is fixed, and show the quality protection book. According to this installation procedure, the user can verify whether the selected closet door brand is professional.