Before installing the vortex pump, a detailed understanding of its installation instructions may play a multiplier effect. The following small series to introduce what you should pay attention to the installation of the vortex pump? Installation of the vortex pump should pay attention to the matters 1. Before installation should check the unit fasteners are loose, there is no foreign body between the pump body and the impeller or Blockage, so as to avoid damage to the pump impeller and pump body. 2. Installation weight of the pipeline as possible not to add on the pump, so as to avoid deformation of the pump. 3. The installation must be tightened to the ground screw to avoid the impact of vibration on pump performance when starting. 4. In order to maintain the convenience and safety, install a regulating valve on the pump into the four pipelines, install a pressure gauge, regulating valve, check valve, explosion-proof wave check valve in the direction of day (above the factory has been equipped with) , Only for high-rise buildings equipped to ensure that the operation within the total head. To ensure the normal operation of the pump, to extend the service life. 5. After installation, turn the pump shaft, the impeller has no stuck phenomenon, otherwise the pump should be disassembled to check the reason. The above is about the vortex pump installation should pay attention to the matter, I hope this content can give everyone a reference in the actual operation. Industrial Internet (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Daohui (QQ / WeChat:) http://beng.liuti.cn/ (Service Hotline:)
Smart Corner Lamp,Smart Corner Light,Corner Smart Light,Smart Led Corner Lamp
Guangdong Smart Street Lighting Co., Ltd , https://www.fldlight.com