The static dissipative layer of the anti-static table mat can release the static electricity of the human body so that the objects, tools, instruments, meters, etc. on the surface of the anti-static mat can reach a uniform potential, so that the electrostatic sensitive equipment is not affected by the electrostatic discharge. Interference, so that the product effectively buffer, to avoid damage to components. The anti-static surface layer has good toughness, is relatively soft and strong rebound, flat, so that the surface of the placed object is not easily scratched, and better protect the integrity of the product.
The bottom layer of the anti-static table mat is also an anti-static conductive layer and has good conductive properties. However, it needs to be used in conjunction with grounding lines, grounding sockets, and other consumables, and it must be properly grounded to better disperse the static electricity. Go out. This consumable is mainly used to lay the workbench tabletop, the worktable on the assembly line, the shelf, and can be laid on the ground to stack products. Anti-static table mats can be cut to different specifications according to the requirements, with good wear resistance, low acid resistance, low alkali resistance, easy to clean, permanent anti-static, with a long-lasting function. Electronic devices, electronic computers, electronic communications equipment, integrated circuits and other microelectronics production workshops and advanced laboratories are required to lay anti-static mats or conductive mats in order to reduce or eliminate static electricity hazards. After the mat is laid and grounded, the working surface will discharge static electricity from the human body, so that the ESD tweezers, tools, instruments and meters that the human body contacts with the table reach a substantially uniform potential.
The electrostatic sensitive device (SSD) is free from the interference of the wide-step surface band caused by electrostatic discharge such as frictional electrification, thereby achieving the effect of electrostatic protection. Anti-static mat for electronic devices, electronic computers, electronic communications equipment and integrated circuits such as microelectronics
Flap Disc Adhesive
Single component Flap Disc resin adhesive glue for making flap disc:
Flap disc adhesive usage:
Composition ratio: A: B = 100:25 (weight ratio)
Available time: 25℃×25-35 minutes
Curing conditions: 25℃×4-5 hours of basic curing
72 hours for maximum strength
Flap disc adheasive glue features:
1. This single component expoxy glue is a room temperature solidification type, yellow brown viscous epoxy resin adhesive;
2. This flap disc epoxy glue can be cured at low or normal temperature, with fast curing speed and certain stop-flow;
3. after curing, the bonding part has high bonding strength, shock resistance, shock resistance, good hardness and good toughness;
4. good acid and alkaline resistance, moisture and waterproof, oil and dust resistance, moisture and heat resistance and atmospheric aging;
5. curing products have good insulation, compression resistance, high bonding strength electrical and physical characteristics.
Scope of resin flap disc glue application
1.. Flap wheel with handle chuck, flap disc, flap wheel, vertical flap disc, plastic flap wheel.
2.. ceramics, wood, glass, fiber products and hard plastic packaging bonding, has excellent bonding strength;
3.. not suitable for bonding elastic or soft materials.
The related abrasive products we can supply is Flap Disc Backing Pad, Abrasive Flap Disc , Bonded Abrasives , and Abrasive Machine such as Flap Disc Making Machine,Abrasive Belt Making Machine, Flap Wheel Machine , Polishing Machine ,Sanding Disc Machine, if you have any needs about abrasive tools, please kindly feel free to contact us.
Single componet epoxy adhesive,Flap Disc Adhesive,Flap Disc Epoxy Glue,Synthetic Resin Flap Disc,epoxy resin for flap disc
Zhengzhou Jiading Abrasive Manufacturing Co.,Ltd , https://www.jd-abrasives.com