Xiao Li started the first day working with foremen and supervisors to eat a starter meal. The supervisors asked for their own work. The supervisors, the foremen and Xiao Li reached a consensus on the starters, and the progress and quality of the materials could ensure that the foreman had to ensure that the workers press Program construction, not rushing and guaranteeing craftsmanship. Because the foreman is known as the master chef in Guangdong, the supervisor said that he will check the quality and craftsmanship according to the procedure requirements to see if he is a real master in Guangdong.
After the workers came into the field, Xiaoli went to the site every day to communicate with the workers and check the quality. If you are not sure, ask supervisors. The mason who had sealed the pipe was not careful at first, but the sealed pipe was not at right angles and the wall was not leveled. Xiao Li contacted the company and the foreman promptly. After the rectification, he began to think that he had sent another person to do it. Only when asked, did he know that the original mason had done it. It is not that the craft is not in place. Still a problem of responsibility.
After being familiar with the workers, the workers see that you are more knowledgeable. People will also make sense, and they will also raise suggestions for construction problems, and the construction will also be more diligent. Xiao Li went to the construction site to see if the two electrician masters worked hard, and the slotting progress was faster. After making a few deficiencies, he went downstairs and bought a few kilograms of high-flying kings to send them to the master. Allowing them to solve the lack of work after work, the principle is to try not to affect the construction of the next day.
In short, the money is to be saved, but the workers must be both rigorous and reflect the concern from time to time. For dozens of pieces, the workers think you are meaningless enough and you will try your best to write. The next time you put forward quality opinions, it will not be too contradictory. Only when you communicate well can you feel that the construction effects before and after communication are completely different!
Entrance decoration restaurant decoration
Planar beam loadcells, also known as planar force sensors, are used in low profile solutions where space is limited. These loadcells can be used as single or multiple loadcell structured platform scales.
Applications with planar beam loadcells
Most of the applications using planar beams are suited with 3 or 4 pieces for each application. which are used for point-of- sale scales/weighing systems in the 10 to 400 pound range. The low profile weighing equipment can be found in many different applications like medical applications (hospital bed and chairs, baby scales, incubators), checkout counters, agricultural devices, retail scales, bench scales and many other weighing devices.
Planar Beam Load Cells,Planar Beam Load Cell,Planar Force Sensors,Multiple Load Cell
Zhejiang Nanhua Electronic Technology Co., Ltd , https://www.nhloadcells.com