High-pressure excavator seals and supports are often stored in spare parts for extended periods of time. The physical properties of most rubber materials change during storage and can no longer be used, such as: excessive hardness, softness, cracks and cracks or other forms of surface aging. These changes are the result of a combination of specific factors or factors such as deformation, oxygen, ozone, light, heat, humidity or oils and solvents. If some simple measures are taken, the shelf life of these products can be greatly extended. The main points of storage, cleaning and maintenance of elastomeric sealing elements have been established in international standards. Recommended storage life for elastomers of different material grades in the standard.
In order to maintain the optimum physical and chemical properties of the components, the following rules should be observed:
Heat: The ideal storage temperature is between +5 ° C and +25 ° C. Avoid direct contact with heat sources such as boilers, radiators, and direct sunlight. If the temperature is lower than +5 °C, the excavator seal may be stiff. Care should be taken when handling. The temperature of the excavator seal should be raised to about 25 °C before use.
Oxygen and Ozone: If possible, the elastomer should be packaged and stored in a sealed container, free from air. Since ozone can damage the elastomer, equipment that may generate ozone should not be placed in the space where the elastomer is stored, such as ultraviolet lamps, high voltage equipment, electric motors, spark sources or static discharges. Combustion gases and organic vapors also produce ozone under photochemical action, so these gases are not available in the storage chamber.
Humidity: The relative humidity of the storage chamber should be less than 70%. Avoid being too moist or too dry.
Light: Seals like rubber excavators should be stored away from light, especially in sunlight or under artificial light containing UV components. The parts are individually packaged in UV-resistant packaging. It is recommended to cover the windows of the storage room with red or orange curtains.
Radiation: In the case of electronic radiation, special protection should be applied to parts to avoid damage to components.
Concerned about surprises
Tag: high pressure excavator seal rubber material
Previous: How to correctly install the cross roller bearing to make it the best Next: Copper and aluminum radiator advantages and maintenance
Our automatic door kits include 1 motor+gear reducer, 1 belt,7 meter, 1 idle pulley, Microprocessor, 4 sets of carriage blue wheels, 2 sets of floor guides,2pcs remote control, 2 sets belt clamp mounting brackets, 1 power supply harness and cable connectors, 2 locator, Aluminum track whose length is 2.08 meter, 3 meter, or 4 meter.
We are a manufacturer of automatic door openers that are designed to provide people convenience. Automatic Door Systems` drive to provide that level of service is but one of the reasons why automatic doors are becoming more and more popular. Our Automatic Sliding Door systems are modern, space-saving and elegant.
Automatic sliding doors have many basic functions some of which include: automatic mode with full opening width and/or reduced opening width, and exit only for traffic control. The opening of automatic doors can also be adjustable to make the opening width smaller or larger. Important safety functions such as safety sensors prevent the door from shutting if persons or objects are in the detection zone. If the door leaves are inhibited when closing, they are immediately re-opened or if the door leaves are hindered when opening, they are immediately stopped by a safety automatic reversing mechanism.
Our most popular sliding automatic door. Think of this as the go-to door for everyday automation needs. All components fully tested and pre-assembled at factory for fast, trouble-free installation.
Applications: Retail, healthcare, airports, hospitality, clean rooms. Shenzhen Hongfa Automatic Door Co.,Ltd rated door is designed, test and certified to meet your environment needs. automatic slide doors for industrial, commercial, healthcare, and retail use. You will find our automatic sliding doors throughout in a wide variety of locations, including: Hospitals, Airports, Retail centers, Pharmacies, Hotels, Grocery stores, Hardware stores, Sporting goods stores, and more.
Automatic Sliding Doors can either be a single door sliding in one direction or bi-parting doors where each door leaf slides in the opposite direction. They are often used in grocery stores, entrances to shopping malls, hospitals and other applications where you want to provide your customers a hands free, safe and easy access to your building.In addition, one of the biggest benefits of automatic doors is energy savings. Since these doors only open when someone comes in or out of your building, it prevents the loss of energy when a door may otherwise be left open for a long time.
The control device of sliding automatic door contains basic function and extensional function, automatic operation / hold-open/closed/half-open to meet customer needs. Electric sliding door controller has multiple interfaces for complete access control systems for keeping your life and property more safety. Such as: safety beam photocell, electric locks, sensor etc. Its drive devices adopts European technology to integrate motor with gear box, which offers strong driving and reliable operation and increased power output , it can adapt to a large door.
Providing strength, beauty, and technology all in one package, Hongfa's line of automatic sliding doors provides entrance solutions for practically any application. An exclusive feature is Hongfa's sound-dampening track reducing operational noise to a mere whisper and stops vibration resonance that can be transferred to the building structures.
Automatic Door Kits,Automatic Sliding Door Opener,Automatic Sliding Door Operator,High Performance Automatic Door Kits
Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.spiralfastdoor.com