Slimdrive Automatic Door, Break-out Door

Model NO.: STD-420
Position: Commercial
Surface Finishing: Finished
Double Leaf Width: 900mm to 3000 mm
Max. Weight: 120kg*2
Max. Opening: 0.7m/S
Max. Closing Speed: 0.5m/S
Power Consumer: 100W
Transport Package: Foam and Cardboard Cartons and Wooden Pallet
Specification: CE, ISO9001
Origin: Guangdong China
HS Code: 7161010000
Slimdrive Automatic Door, Break-out Door

Function and Characteristic
1. Install easy and fast .
2. Through operator box ,operating mode (auto,half-open , permanent open ,exit,night ) and parameter ( speed , delay close , close force , open width...) can be tuned .
3. Connectivity : beam sensor , key -switch , remote control , coded access controller , can interface to STD420  and STD420 system can drive alarm and interface to another control system .

4. Error detect and disply

5. Auto tune delay time when heavy traffic .


Full-featured , easy to use automatic sliding door technology - reflect the perfect combination of the safety
and accuracy .

STD420 control system is very intelligent : it can be auto-adjust drive force by leaf weight to make leaf run stably . speedy and smoothly ,specially fit for heavy transit entrance such as bank , hospital ,opera house and so on .

It is special double track can avoid leaf degress . The battery( within standard part ) can open the door even on power failure .

The operator box can tune mode and preferences . STD420 can expand to interface with many kind of sensor and control device .

Full-featured , easy to use automatic sliding door technology - reflect the perfect combination of the safety
and accuracy .

STD420 control system is very intelligent : it can be auto-adjust drive force by leaf weight to make leaf run stably . speedy and smoothly ,specially fit for heavy transit entrance such as bank , hospital ,opera house and so on .

It is special double track can avoid leaf degress . The battery( within standard part ) can open the door even on power failure .

The operator box can tune mode and preferences . STD420 can expand to interface with many kind of sensor and control device .

Function and Characteristic
1. Install easy and fast .
2. Through operator box ,operating mode (auto,half-open , permanent open ,exit,night ) and parameter ( speed , delay close , close force , open width...) can be tuned .
3. Connectivity : beam sensor , key -switch , remote control , coded access controller , can interface to STD420 and STD420 system can drive alarm and interface to another control system .

Technical Parameters
 


Single leaf opening width		 700mm to 2000mm
Double leaf opeing width 900mm to 3000mm
Max. weight (single leaf) 100KG
Max. weight(double leaf) 2x100KG
Body size(height x depth) 100mm x 180mm
Max. opening speed 0.7m/s
Max closing speed 0.4m/s
Closing delay time 0 - 60 second
Input 220V AC /50Hz or 24 VDC
Max. power consume 100W



All components a set system of STD420


All components a set system of STD420

1. Rail

2. Tail wheel

3. Breaker

4. steel wired tooth belt

5. Runner

6. Stopper

7. Center computer controller

8. Battery

9. Transformer

10. Brush Motor

11. Side panel 


Component picture :
 
Slimdrive Automatic Door, Break-out Door

Item name: Ferrous Oxalate Dihydrate

Ferrous oxalate dihydrate

Search number: [CAS 6047-25-2]

Molecular formula: FeC2O4.2H2O

Molecular weight: 179.89

Properties: light yellow powder crystallization, slightly soluble in water, soluble in dilute acid, melting point 160 degrees, heated to 190 degrees when the decomposition of iron oxide; is the production of lithium iron phosphate quality materials.

Use: used as a photographic developer, for the pharmaceutical industry, battery grade Ferrous Oxalate can be used as cathode materials of lithium iron phosphate materials.

Ferrous Oxalate

Ferrous Oxalate,Ferrous Oxalate Dihydrate,Additive Ferrous Oxalate

Xi'An Lanzhiguang Fine Material CO.Ltd , http://www.lanzhiguangchem.com