Drying equipment will encounter many problems during use. Today we will solve the problem of burning materials inside the drying equipment. The reason for the internal combustion of the drying equipment is mainly because the dryer is too small, and the drying equipment is not well sealed. , drying materials can not be sent away in time. **
1. The drying equipment is too small: if the dryer volume is too small, and you have to dry the material in a large amount, then the material discharge rate will not meet the standard. The heat source device inside the dryer equipment is not enough to thoroughly dry the moisture of the material. What should I do? You can only choose to forcibly increase the temperature of the heat source device. When the material can be dried, you want to increase the output, and then increase the heat source. The result is the internal combustion of the drying drum. The equipment should be shut down immediately, and then the power is cut off, and fire prevention measures should be adopted appropriately. If you really need a large amount of drying material, please choose a large type of drying equipment to process the material, otherwise there will be a fire phenomenon, if the injured staff is not worth the loss;
2 , the drying equipment is not well sealed: if the dryer equipment is not well sealed, there will be combustion, and the drying equipment is usually dry in the sealed state. The sealing problem may be caused by the design of the interior of the drying drum, or it may be the burning phenomenon caused by excessive ventilation. The dryer equipment is equipped with an appropriate ventilation system. If the ventilation is too large, the internal fire of the drying equipment will be windy. And Zhang, if the fire is too large, there will be a burning phenomenon inside the drum, which will cause the material to be burnt in a large amount. Therefore, when you purchase the drying equipment, you should check the sealing condition of the equipment and the equipment installation in accordance with the national standards. Check all the problems and test the machine for several hours. When the equipment has a good foundation, it can be baked normally. Dry material
3 , drying materials can not be sent away in time: If the material inside the drying equipment can not be sent away in time, it will also cause the burning phenomenon of materials during drying. When the heat source inside the dryer equipment reaches a certain temperature, the moisture content of the material will be Will be exhausted. If the water content of the material is reduced to a minimum and cannot be sent out, the material will continue to absorb the heat source, and its own temperature will become higher and higher. After the material absorbs a certain heat source and reaches the burning point, the material will appear to be ignited. Will cause a big fire. Therefore, while drying the material, it is necessary to check the inside of the dryer equipment regularly to see if the material flows normally. If the flow rate is too slow, the feed should be reduced, and the material can continue to be fed when the material flows normally.
DRYER Price: http: //
Galvanized Barbed Wire,Galvanized Barbed,Zinc Coated Steel Barbed Wire,Galvanized Wire Coatings
Shenzhou City Hongda Hardware Products Co.,Ltd , https://www.hdgabion.com