OEM Kitchen Door of Aluminum Extrusion Profile

Advantage:
1. Professional aluminium manufacturer, advanced equipment & technology.
2. Over 18+ years of aluminum profiles experience.
3. Various surface treatment of aluminum can be chosen depending on your interests.
4. We have a perfect quality assurance system, such as product quality testing equipment and independent testing laboratory.

Factory information:
Aluminum profile details:





 

Explosion-proof floor (spark-guided electrostatic ground hardener)

Is a rigorous quality control, site-ready factory ready-mix powder. It contains a selection of metallic mineral aggregate materials and specialty Portland cement, as well as special additives to promote construction performance. Specially made of materials to ensure accurate grade with no impurities, the aggregate shows good electrical conductivity and wear resistance.

For the need to improve the wear resistance, resistance of the concrete surface layer, especially the spark, antistatic area. For example: Flammable warehouses, chemical plants, petrochemical plants, dangerous products workshop, gas stations, liquefied gas stations, ammunition depots, hangars, textiles, electronics, paper, printing and other long-term electrostatic regions.

Construction Technology:

1, the minimum content of grass-roots concrete 300kg / m3, concrete should be segregated and bleeding to minimize water-cement ratio less than 0.55, concrete slump should be between 75 to 100 mm;

2, in order to ensure the final finishes display the required conductive and sparking properties, the correct amount of 9kg / m2 construction is essential. It is advisable to draw the area of the plate to be constructed on the ground and throw enough material to achieve the required amount. (Anti-static requirements are required to embed copper wire)

3, evenly sprinkled on the concrete surface, to mention pulp treatment, when the ground has sufficient hardness, will not be damaged, you can use the mechanical spatula blade for the final polishing ground

4, in order to ensure the ground characteristics, must be properly maintained

Material properties:

Wear resistance: The treated concrete floor exhibits at least three times more wear resistance than the untreated concrete floor.

Non-flammable property : Using a grinding wheel, the test room was completely dark, under pressure of 1020N, and no instantaneous spark was found.

electrical properties: It shows good conductivity to transmit static electricity, and can be grounded according to the traditional method after specific requirements. The ductile metal materials are concentrated on the ground so that they have a high anti-flaming property to metal collision.

Surface resistance value: 1.0×105~1.0×108Ω
compression strength: Using the same amount of water as the actual construction, the standard compressive strength of the test block reached 90Mpa in 28 days.
Anti-Static Ground Hardener Performance characteristics:

1,Make the ground extremely hard, wear resistant and impact resistant
2, form integral bond with concrete base surface
3, flame-proof static electricity
4, prevent all kinds of oil, grease erosion
5,Easy to construct

Storage: The original package is stored in normal temperature and dry environment for 6 months.

Health and Safety:

When the product is mixed with moisture, the released alkali can damage the skin, stimulate the eyes and respiratory system, and avoid inhaling the powder. Avoid contact with skin and eyes. Wear suitable gloves and eye protectors. Once you touch the skin, rinse with clear water. Once you touch your eyes, wash with plenty of water and seek medical advice

project	performance index
compression strength(3days)	≥40Mpa
Compress ionstrength(28days)	≥90Mpa
rupture strength(28days)	≥13.5Mpa
Non-flammable	Non-flammable,Non exploding, nonflammable
Non exploding, nonflammable	A1 level
abrasion performance(750g/500r)	≤0.03g/cm2
Hardness (Morse)	≥7
Surface strength (indentation diameter mm)	≤3.1
Oil resistance	Oil seepage＜0.3mm
High temperature	+200℃
Antifreeze type	-40℃(Freeze-thaw specimen after 25 times without cracks, corner off defects, the rate of strength loss)≤15%
Bond strength(28days)	≥2.0Mpa
Skid resistance (wet and dry friction coefficient)	≥0.5
Air cleanliness	N7~N9 level
Green environmental protection	No harmful radioactivity, no harmful volatiles, no pollution

Anti-static Ground Hardener

Anti-Static Ground Hardener,Anti-Static Floor Hardener,Anti-Static Fire-Free Aggregate,Anti-Static Aggregate Ground Hardener

Jiangmen Kasole Building Materials Co., LTD. , http://www.kasole-paint.com