Nickel Plated Neodymium Iron Boron Magnet

General Introduction:
1. Our NdFeB rare earth magnet is particularly suitable for high volumn production of a wide variety of shapes and size ranges
2. Precise dimensional control is achieved in both processed and usually the component does not require further machining
3. Injection moulded NdFeB do not normally require coating due to better corrosion resistance, however coating is recommended for compression moulded NdFeB
 
Features
1. High energy ranging from 8MGOe to 48MGOe with wondrerful coercive force
2. Less expensive,and mechanically stronger and less brittle than SmCo
3. Density:13%,smaller than SmCo products
4. For most applications,coating or plating is recommended
 
Advantages:
1. High energy
2. Very high Hc and Hci output
3. More economical than SmCo
4. Wonderful performance at ambient temperature.
 
When inquiring or ordering, please send us following information: 
1.Type of magnet (material & grade) 
2.Quantity (annual and per shipment) 
3.Shape and dimensions (drawing if necessary) 
4.Direction of magnetization 
5.Magnetized or unmagnetized 
6.Details of surface treatment 
7.Application if possible 
8.Other information and/or requirements 
hope to cooperate with you
Thank you.

For more detail info, please feel free to visit our website or inquire us at any of your convenience.
Ying Jun
Senior technical manager                       
Yuxiang Magnetic Materials Ind. Co., Ltd
Add: Floor 16, Jinyuan plaza, # 57 Hubin Nan Road, Xiamen, China 361004
Mobile: +86 13850003134
TEL: 0086-592-2295387/2217138
FAX: 0086-592-2222216
(E-mail): mag (a)e-magnet(.)cn
 
 
   
 
live:yuxiang5716





 

Aluminum Nitride Ceramic

The AIN crystal is a covalently bonded compound with a [AIN4] tetrahedron as a structural unit, and has a wurtzite structure and is a hexagonal system. Chemical composition AI 65.81%, N 34.19%, specific gravity 3.261g / cm3, white or grayish white, single crystal colorless and transparent, sublimation decomposition temperature under normal pressure is 2450 °C. It is a high temperature heat resistant material. Thermal expansion coefficient (4.0-6.0) × 10 -6 / ° C. Polycrystalline AIN has a thermal conductivity of 260W/(MK), which is 5-8 times higher than alumina, so it has good thermal shock resistance and can withstand extreme heat of 2200 °C. In addition, aluminum nitride is not attacked by aluminum liquid and other molten metals and gallium arsenide, and particularly has excellent corrosion resistance to molten aluminum liquid.

Aluminum Nitride Ceramic,Aluminum Nitride Plate,Aluminum Nitride Shaft,Boron Nitride Ceramic Shaft

Dongguan Haikun New Material Co., Ltd. , https://www.hkceram.com