| Home>Bearing knowledge>Mechanical sealing equipment, application of skill methods |
Mechanical sealing equipment, skill method
Source: Bearing network time: 2018-04-12
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
2. The sealing part of the equipment should be kept sanitary when the equipment is in use; the sealing parts should be cleaned; the sealing end face is intact; avoid impurities and dust from entering the sealing part.
3. It is forbidden to hit and hit during the process of the equipment; to avoid the mechanical seal conflicts from being damaged and the seal is invalid.
4. When the equipment is in contact with the seal, the surface should be coated with a layer of hygienic mechanical oil; in order to smooth the equipment,
5. When the equipment is in the static ring gland; it is necessary to tighten the screws evenly; to ensure the straight end of the static ring end face and the axis line,
6. Push the moving ring by hand after the equipment; make the moving ring move sensitively on the shaft; and have certain elasticity,
7. After the equipment, the shaft and the shaft should be moved by hand.
8. It is necessary for the equipment to overflow the medium before work; to avoid the conflict and invalidate the seal.
9. For easy crystallization and granular medium; when the medium temperature is >80oC; the corresponding scouring, filtering and cooling methods should be adopted; for various auxiliary equipment, please refer to the relevant specifications of mechanical seal.
Recommend to friends comments close window
| Bearing related knowledge |
| What are the famous imported bearing brands? NTN bearing operation load and stress change on the component angle touch bearing touch point of view INA thin-walled bearings in the production of parts in the process of "gate critical inventory" Analyze the selection of suitable bearing types |
This article links to http://
Please indicate China Bearing Network http://
Previous:Replace the lower bearing of the door machine with the jacking method (2)
The next part: Talking about the reasons and countermeasures of leakage of engineering machinery hydraulic system
The LED emergency driver for panel can be customized from 3W-100W with half power emergency output for emergency lighting 60-300mins. Automatic lighting up when main power failures. Suitable for LED fitting with external led driver. With internal or external lithium battery back up. Widely using for office, building, warehouse, school, hospital, workshop etc.
Emergency Led Driver,Emergency Backup Driver for led,Emergency Light Driver,Emergency Driver For Panel,led light emergency power supply
Foshan Nai An Lighting Electric Co.,ltd , https://www.fsnaipsled.com