The Machinery Industry Federation clearly stated that the main task of the China Machinery Industry Federation in 2008 revealed that the main tasks of the machinery industry in 2008 were: the selection of energy-saving emission reduction surveys in six industries, including casting, forging, heat treatment, internal combustion engines, heavy machinery and bearings. Put forward energy saving measures. Ensure the completion of national key projects and major projects such as the development of 1 million volt AC power transmission, PTA equipment, and the development of key equipment for millions of kilowatts (second generation improved) nuclear power. It can be seen that in the future, energy-saving and environmental protection equipment, high-voltage power grid equipment, and heavy machinery equipment manufacturing industry should have accelerated growth. Leading companies in these industries should be worthy of attention.
TBEA's net profit increased by 1.3 times in 2007. In 2007, TBEA realized a net profit of 539 million, YOY increased by 134.3%, and diluted earnings per share of 0.63 yuan/share. At present, TBEA's hand-held orders have exceeded 10 billion yuan. At the same time, the investment plans of State Grid and China Southern Power Grid in 2008 increased by 37.5% compared with 2007, and the growth rate more than doubled in 2007. The market environment in 2008 will be more than that in 2007. it is good. It is expected that the EPS of the TBEA in 2008-10 will reach 0.69, 0.9 and 0.98 yuan/share respectively, corresponding to 36.8 times of PE in 2009, giving a “Cautious Buy†rating.
Liyuan Hydraulics' net profit in 2007 was 108 million yuan, a year-on-year increase of 38.14%. In 2007, Liyuan Hydraulics achieved a net profit attributable to the parent company of 108 million yuan, a year-on-year increase of 38.14%, and diluted earnings per share of 0.64 yuan/share. At present, the four main products of Liyuan Hydraulic have obvious leading position in China, and these four kinds of products are also the upgrading and development direction of parts in the upgrade process of this round of equipment manufacturing industry, and have an indispensable important position, so long-term The growth prospects are broad. Therefore, the company's long-term growth is also very worth looking forward to. EPS in 2008-09 is expected to reach 0.86 and 1.12 yuan/share respectively, corresponding to 31 times PE in 2009, giving a “Cautious Buy†rating.
Investment suggestion: As energy-saving and environmental protection equipment, high-voltage power grid equipment, and heavy machinery equipment manufacturing are the upgrading direction of the domestic machinery industry, we continue to give the machinery industry a “buy†investment rating, focusing on the recommended stocks that are still Shenyang machine tools. Tiandi Technology, TBEA, Siyuan Electric and Sany Heavy Industry.
I. Industry overview and major event reviews
(I) The total output value of the machinery industry in 2007 increased by 32.03% year-on-year. According to the statistics of the Machinery Industry Association, the total industrial output value of the machinery industry in 2007 was 7,304.48 billion yuan, a year-on-year increase of 32.03%. The sales value of the completed sales was 7,133.839 billion yuan, a year-on-year increase of 31.86%. The growth rate was 1.97 percentage points higher than the previous year, a record high in recent years.
From the perspective of the seven major industries, the two major industries, construction machinery and machine tool tools, grew the fastest, with 42.91% and 36.89% respectively, and the growth rate was in the forefront. In particular, on the basis of the higher growth of the construction machinery industry in the previous year, it increased by 5.77 percentage points in 2007, especially in the performance. However, the agricultural machinery industry fell back, down 2.41 percentage points, and the growth rate of total output value was 10.9 percentage points lower than the average level of the machinery industry.
Next page
These tip combs are for use with the Pharma KingFisher Flex 96 Deep-Well Head Magnetic Particle Processor or MagMAX Express-96 Deep-Well Magnetic Particle Processor in combination with PrepSEQ ResDNA kits and ProteinSEQ kits.
Optimize performance using KingFisher Flex System consumables designed specifically for use with these instruments. KingFisher Flex disposable plastics (tip combs and microplates) are made of polypropylene and are ideal for magnetic particle processing because of their low binding affinity for biomolecules. Their special design enables excellent recovery of magnetic beads.
The tip combs are made of PP material, they can be used with 2.2ml square well V bottom and 0.5ml elution plates for the system KINGFISHER FLEX. The tip combs could suffer centrifuge 3000-4000 and don't change the original shape. The products are suitable for the standard ANSI and multi-channel Pipette Tips machnie and automatic equipment. We could accept OEM/ODM.
For use with Viral RNA extraction, DNA extraction, RNA/DNA quantification, immunopreciptitations and many more KingFisherâ„¢ applications
good chemical and physical resistance: e.g. phenols, chloroform, DMSO and temperatures as low as -80°C/-112°F
Tip Comb,Tip Comb Plate,Kingfisher Tip Comb,Tip Comb Kingfisher,Magnetic Tip Comb,8-Strip Tip Comb
Yong Yue Medical Technology(Kunshan) Co.,Ltd , https://www.yongyuemedicals.com