In the security television monitoring system, with the improvement of people's safety awareness, the need for 24-hour continuous monitoring of television monitoring in important venues and the maturity of infrared imaging technology, the use of infrared waterproof cameras has become increasingly high and has gradually developed into a Trends.
IR waterproof camera purchase attention
1. Given the minimum illuminance of the camera, it also gives the required value of the aperture F, and the zoom lens generally only gives the maximum value of 1:F, that is, the minimum value of the aperture F (the maximum size of the actual aperture), F= f/D, then D is a fixed value. When the f focal length is increased by 10 times, F becomes large (ie, the actual aperture size becomes very small). Luminous flux will be greatly affected 2. When using an auto iris lens, automatic gain control, or automatic electronic shutter camera, the lens aperture F value also changes. For example, if there is a scene near the camera, the light is reflected back to the camera, or there is a light near the camera. At this time, the camera's sensitivity will be reduced, the size of the auto iris will be turned down, and the light flux will be greatly affected.
3. The minimum illumination given by the camera. What is the minimum illumination concept here? The nominal value of the video signal generated by the camera is 1V, the standard value is 0.7V, and the video signal value at the lowest illumination is 1/3-1/2 standard. Therefore, the image of the camera at the lowest illumination level will never be "like white."
4. The protective cover also affects the effect of the infrared lamp. In the infrared light transmission process, through different media, the transmittance and reflectance are also different. Different window glasses, especially automatic defrosting coated glass, have different attenuation of infrared light.
With the rapid development of the infrared night vision system of infrared waterproof cameras, infrared lamp production and supply manufacturers will also increase, but the red light products are not as easy as some people think, but also have different conditions in terms of technology, testing equipment and equipment, and hope that users Too much to compare, choose carefully. The infrared light waterproof camera infrared light should be read carefully for the user first, especially for the personal equipment safety precautions. Check whether the supporting aspects mentioned in the previous section meet the requirements. Whether the influencing factors that should be taken into consideration should be taken into consideration, if not meet the requirements, the equipment used can be adjusted in time.
The user should not arbitrarily increase the power supply voltage, because the infrared waterproof camera infrared light is designed to take into full consideration of its irradiance, taking into account its safety and reliability. Raising the power supply voltage may cause the infrared lamp to be burned, and it is even more desirable not to tamper with the infrared lamp. If this is done, the manufacturer may no longer be responsible for maintenance. If there is a problem with the IR waterproof camera infrared light, contact the manufacturer or supplier.
5. The sharpness of the image produced by the camera at the lowest illumination is measured by a television signal test card. The black and white stripes require a black reflectance of approximately 0% and a white reflectance of greater than 89.9%. Sometimes we do not have such conditions when we observe on the scene. For example, the reflectivity of leaves and grass is very low, and the contrast is very small, so it is not easy to obtain clear images.
IR waterproof camera purchase attention
1. Given the minimum illuminance of the camera, it also gives the required value of the aperture F, and the zoom lens generally only gives the maximum value of 1:F, that is, the minimum value of the aperture F (the maximum size of the actual aperture), F= f/D, then D is a fixed value. When the f focal length is increased by 10 times, F becomes large (ie, the actual aperture size becomes very small). Luminous flux will be greatly affected 2. When using an auto iris lens, automatic gain control, or automatic electronic shutter camera, the lens aperture F value also changes. For example, if there is a scene near the camera, the light is reflected back to the camera, or there is a light near the camera. At this time, the camera's sensitivity will be reduced, the size of the auto iris will be turned down, and the light flux will be greatly affected.
3. The minimum illumination given by the camera. What is the minimum illumination concept here? The nominal value of the video signal generated by the camera is 1V, the standard value is 0.7V, and the video signal value at the lowest illumination is 1/3-1/2 standard. Therefore, the image of the camera at the lowest illumination level will never be "like white."
4. The protective cover also affects the effect of the infrared lamp. In the infrared light transmission process, through different media, the transmittance and reflectance are also different. Different window glasses, especially automatic defrosting coated glass, have different attenuation of infrared light.
With the rapid development of the infrared night vision system of infrared waterproof cameras, infrared lamp production and supply manufacturers will also increase, but the red light products are not as easy as some people think, but also have different conditions in terms of technology, testing equipment and equipment, and hope that users Too much to compare, choose carefully. The infrared light waterproof camera infrared light should be read carefully for the user first, especially for the personal equipment safety precautions. Check whether the supporting aspects mentioned in the previous section meet the requirements. Whether the influencing factors that should be taken into consideration should be taken into consideration, if not meet the requirements, the equipment used can be adjusted in time.
The user should not arbitrarily increase the power supply voltage, because the infrared waterproof camera infrared light is designed to take into full consideration of its irradiance, taking into account its safety and reliability. Raising the power supply voltage may cause the infrared lamp to be burned, and it is even more desirable not to tamper with the infrared lamp. If this is done, the manufacturer may no longer be responsible for maintenance. If there is a problem with the IR waterproof camera infrared light, contact the manufacturer or supplier.
5. The sharpness of the image produced by the camera at the lowest illumination is measured by a television signal test card. The black and white stripes require a black reflectance of approximately 0% and a white reflectance of greater than 89.9%. Sometimes we do not have such conditions when we observe on the scene. For example, the reflectivity of leaves and grass is very low, and the contrast is very small, so it is not easy to obtain clear images.
Outdoor Christmas tree/elk/jingle bells LED String lights Flashing Lights Curtain Lights Waterproof Outdoor indoor Holiday Party Connectable Wave Fairy Light Features:
100% Brand New and High Quality LED Ice Bar Light /3 meters long(drooping 16)
LED String lights pendant,each pendant with a snowflake.
Five lighting colors, Warm White, White, Multicolor, Blue, Purple.
With 8 different modes: Combination, Waves, Sequential, Slo-glo, Chasing/Flash, Slow Fade, Twinkle/Flash, Steady On. You can use it anywhere you want in any mode.
Led Light Strip,Led Strip,Strip Light,Hue Lightstrip
Taiyaun JDS Machinery And Equipment Co., Ltd. , https://www.ccagoods.com