First of all, we must understand the proportion of air in alcohol, the proportion of air is greater than air, and the installation height should be as low as possible.
Note on the installation of alcohol concentration alarm (1) The alarm probe is mainly a detection element that contacts the combustion gas sensor. The platinum wire coil is coated with alumina and a binder to form a spherical shape, and platinum, palladium and other rare metals are attached on the outer surface. Therefore, be careful when installing to avoid damaging the probe.
(2) The installation height of the alarm should generally be 160-170cm, so that maintenance personnel can carry out routine maintenance.
(3) The alarm is a safety instrument, sound and light display function, and it should be installed in the place where the staff can easily see and hear, so as to eliminate the hidden trouble in time.
(4) There must not be strong electromagnetic fields (such as high-power motors and transformers) that affect the operation of the instrument around the alarm.
(5) The density of the gas to be measured is different, and the installation position of the indoor probe should also be different. When the measured gas density is less than the air density, the probe should be installed 30cm away from the roof and downward; otherwise, the probe should be installed 30cm away from the ground and upward.
Note on the installation of alcohol concentration alarm (1) The alarm probe is mainly a detection element that contacts the combustion gas sensor. The platinum wire coil is coated with alumina and a binder to form a spherical shape, and platinum, palladium and other rare metals are attached on the outer surface. Therefore, be careful when installing to avoid damaging the probe.
(2) The installation height of the alarm should generally be 160-170cm, so that maintenance personnel can carry out routine maintenance.
(3) The alarm is a safety instrument, sound and light display function, and it should be installed in the place where the staff can easily see and hear, so as to eliminate the hidden trouble in time.
(4) There must not be strong electromagnetic fields (such as high-power motors and transformers) that affect the operation of the instrument around the alarm.
(5) The density of the gas to be measured is different, and the installation position of the indoor probe should also be different. When the measured gas density is less than the air density, the probe should be installed 30cm away from the roof and downward; otherwise, the probe should be installed 30cm away from the ground and upward.
Automobile Bearing ,Bearings For Cars,Bearings Auto,Bearing Automobile
NINGBO DEMY (D&M) BEARINGS CO.,LTD , https://www.demybmtbearing.com