Home improvement is very important for every family, and the home improvement construction process is the main frame structure of the whole home decoration, and many of us always have their own misunderstandings about home decoration, such as buying paint, many people think that there is no The paint of the taste is good. In fact, this kind of speech is wrong. So what is the construction of the home improvement? The following decoration home decoration network Xiaobian take everyone to understand the specific content of the home improvement construction process !
Home improvement construction process - preparation before starting work
1. First of all, it is necessary to clearly explain the design features of this renovation project. For example, the decoration design of this project is very rich, delicate and highly decorative, which can fully display the modern, Gorgeous space feel.
2, indicating the construction process, construction period, etc. in the entire decoration design process, what are the requirements for the construction process, and there is a detailed list of the installation and adjustment of the system update involved in the entire project.
Home improvement construction process - wall construction
1. First use the cutting machine to cut the part to be removed and then hit it. Do not use a sledgehammer.
2, first use a small hammer drill to hollow the bottom and then slowly play up. The door of the new door is to be added to the beam.
3, can not hit part: load-bearing walls, concrete walls.
Home improvement construction process - hydropower construction
1. The hot and cold water pipes are buried in the depth of the wall. The distance between the pipe wall and the wall skin must be 1cm, strictly following the principle of left heat and right cold.
The water outlet shall be arranged in strict accordance with the national standard faucet spacing, and the inner and outer wires shall be separated.
2. The wall cannot be sealed without pressure test.
3. When the circuit project is completed, it is necessary to test all the sockets and lamp wires with electric bulbs for power-on test.
Home improvement construction process - waterproof construction
1. Clean the wall where the floor needs to be waterproof.
2, the ground is strictly painted with waterproof coating twice, and the place where the water pipe is installed should be rolled up 20cm.
3. After two days of drying, the water pipe and the floor drain are tightly sealed, and water of 5-8 cm depth is placed for 48 hours of water shut-off experiment.
4, the wall brush moisture-proof coating once again, the height is preferably 1.5 - 1.8m or more, the brush should be strict.
5, door and window sets and wood products against the wall for moisture-proof treatment, to prevent mildew and blackening in the future, when the production of tung oil evenly painted on the board against the wall and the ground.
Home improvement construction process - wall construction
1. Clean the site and brush the building glue once and for all.
2. Use the ink fountain to eject the straight line of the yin and yang angles, and use the gypsum powder or white cement to make the right angle of the yin and yang angle along the ink line.
3. The cement wall should be covered with pure white cement. The white wall that the developer has already treated must be removed if it is powdered. After the eradication, the white cement will be worn again. The white wall with no powder will be finished with putty powder or self-adjusting putty. The first time.
4. After the first time the putty is dried, use the finished putty to cover the ground twice.
5, the third time is also the same with the finished putty.
Home improvement construction technology standards
1. Hydropower construction: Try not to slot the wall. Pay attention to the quality of the line pipe and other auxiliary materials when laying the line. Pay attention to the distinction between hot and cold water when laying the water pipe. Finally, carry out the water pipe pressure test. Verify that the waterway is qualified.
2, mason construction: the most important thing is the waterproof treatment, not only must be carefully selected on the waterproof material, but also timely inspection, wall tiles should pay attention to the choice of ceramic tile, but also prepare cement, sand and other accessories .
3, woodworking construction: mainly in the production of ceilings and cabinets, some custom furniture are basically in this stage to measure the size, re-confirm the size of the sink, finalized.
4, paint construction: to the paint stage is basically into the late stage of the decoration, the paint project is a face project, must be careful, after some basic installation work, you need to use paint to make up between them and the wall Gap.
The above is the introduction of the home decoration construction process and standards for the decoration home network, I hope to help everyone, home construction is a very important link, although many of our home construction is packaged for professional staff, but Knowing some specific processes is very helpful for supervising the renovation workers' work. If you need to know more about it, please continue to pay attention to our decoration encyclopedia!
More related wonderful reading:
Home improvement construction process construction process acceptance criteria and precautions
Which renovation team can be found to find the best interior decoration construction plan?
Renovation process Raiders: renovation preparation work
Bidet Sprayer,Toilet Bidet Sprayer,Stainless Steel Bidet Kits,Non-Electric Toilet Bidet Sprayer
kaiping aida sanitary ware technology co.,ltd , https://www.aidafaucet.com