Fire protection maintenance is the prerequisite for the normal function of the fire protection system, in accordance with the national "fire automatic system construction and acceptance specifications", "automatic sprinkler system construction and acceptance specifications" "construction of automatic fire facilities and fire control room standardization management standards" The specification, combined with Party A's actual equipment and management requirements, will ensure that the entire system will be maintained in a good state of operation. The maintenance of firefighting facilities is based on the principle of "prevention first, prevention and elimination of combination".
Chinese name fire protection and maintenance type of fire protection system to play a normal function to ensure the normal operation of fire fighting equipment in accordance with the "Fire Law"
Contents Existence Role Relevant information Specific role Inspection content Daily maintenance and emergency maintenance Service content Maintenance plan Fire protection preservation Fire safety maintenance Related information The fire protection system is a guarantee for the normal production, work and life safety of each unit, according to the Ministry of Public Security. In the spirit of the [1996] No. 21 “Notice on Grasping the Establishment and Implementation of the Inspection and Maintenance Management System for Building Fire Protection Facilities†and the Beijing Municipal Government’s directive No. 143 “Beijing Municipal Fire Safety Responsibility Supervision and Management Measuresâ€, the firefighting facilities must be regular Maintenance, maintenance, and discovery of faults will be promptly removed to ensure that the fire protection facilities can operate normally and that they can play their effective safety early warning functions to protect state assets from loss and the safety of the people. We sincerely hope that through common efforts, we can make effective use of it.
Application of automatic fire alarm/fire linkage system is an effective measure for early detection of fire, prevention of fire spread, and reduction of fire hazards, but it is not a matter of installing an automatic fire protection system. In the event of an automatic firefighting system failure, lack of duty-to-service personnel's sense of responsibility, or unattended operation, a disposable cigarette butt and an old or overloaded power line are most likely to cause disaster. A large number of fire cases have proved that the main cause of fires, especially the occurrence of extraordinarily large and vicious fires, is the failure of the fire protection facilities to function or improper handling by the duty personnel. Therefore, to raise awareness of fire safety; make automatic fire fighting system, fire extinguishing system maintenance and maintenance; qualified personnel trained by the two sides responsible for the daily management and operation of fire equipment, is of great significance.
The specific role of fire protection and maintenance along with the further implementation and implementation of the “Fire Lawâ€, especially the past painful lessons from the vicious fire accidents and the serious handling of the responsible persons by the law enforcement agencies, should also enable us to realize that we must ensure the fire fighting equipment. The necessity of normal operation.
Fire Maintenance Inspection Contents Fire Protection Maintenance Daily Maintenance
1, according to the plan every month to sample and test some of the equipment, resulting in all equipment tested in one year. Ensure the normal operation of the equipment.
2. Conduct comprehensive inspections every quarter or half a year (depending on the size of the firefighting project), and identify problems in time.
3. Each year, the company's professional fire detection team conducts detailed fire-fighting tests, including fire-fighting facilities testing and fire-fighting electrical performance testing. Issue a formal inspection report and report to the fire department for record.
4. A professional detector cleaning plant completes cleaning of all detectors every other year.
5. Assist or take full responsibility for the business with the fire department to ensure that no normal work is delayed due to fire problems.
6, depending on the size of the firefighting project, the company can send someone to work resident to assist with daily problems.
Fire Protection Maintenance
1. The company promised to solve the general problem within 24 hours, and serious or urgent problems were solved in the shortest time.
2. Maintain a close cooperation relationship with Party A in an honest service attitude, pay attention to the communication between each other, and negotiate and solve problems.
Fire Protection Service Content
1. Automatic fire alarm system;
2, fire linkage system;
3, automatic sprinkler system;
4, fire hydrant system;
5, gas fire extinguishing system;
6, fire shutter doors;
7, smoke prevention system;
8, fire control room;
9, fire pump.
The Fire Protection Maintenance Project is based on the requirements of the Ministry of Public Security’s “Notice on Accelerating the Establishment and Implementation of a Management and Inspection System for the Inspection and Maintenance of Building Fire Protection Facilities†to ensure the normal operation of the fire protection facilities in the building and ensure the safety of the people and property of the building. Some high-tech networking platforms plan to develop maintenance and repair services for fire protection facilities in the building as follows:
I. Firefighting Facilities Maintenance and Repair Scope The scope of fire automatic alarm system maintenance and repair includes:
1, automatic fire alarm system
2, automatic sprinkler system;
3, gas fire extinguishing system;
4, fire hydrant system;
5. The maintenance and repair of fire-fighting linkage equipment is responsible for the interface to fire-fighting linkage equipment;
6, fire alarm lines and fire-fighting linkage lines and fire linkage power lines, pipeline problems, including short circuit, open circuit.
Our company will repair the faults in the scope of maintenance and repair free of charge manually (such as artificial short circuit, open circuit, equipment damage and other faults are not within the scope of maintenance); if the equipment is aging and damaged and can not be repaired, your organization is responsible for purchasing new ones. The equipment is responsible for the installation.
During the process of system testing and maintenance, your organization shall provide the necessary working environment and personnel cooperation, otherwise there will be unpredictable losses. Our company has the right to refuse payment and provide the above services.
Second, the scope of service of the various subsystems in the fire protection system
1. Automatic fire alarm system (1) Regular inspection and test of the fire alarm system.
a. Test each function of the fire alarm controller.
b. The use of special testing equipment to test the operation of the detector in batches and confirm the lamp display.
c. Perform 1-2 charge-discharge tests on the standby power source each year, and perform 1-3 times of main power and standby power supply automatic switching tests.
(2) Regular inspections and tests are conducted on linkage equipment of fire fighting systems.
a. Each year, fire-fighting linkage tests are conducted twice for control devices such as smoke prevention devices and fire shutter doors.
b. Conduct fire-fighting linkage tests twice a year for fire accidents.
c. Each year, the elevator is forced to stop at the first level of fire-fighting linkage test twice.
d. Conduct intercom call tests twice a year for fire-fighting communications equipment in the fire control room.
e. Annually cut off the non-fire power supply fire-fighting linkage test twice.
(3) Repair the faults of the fire automatic alarm system control lines and linkage lines.
(4) Repair the failure of the fire automatic alarm system.
(5) Inspection and maintenance of the fire communication circuit of the fire automatic alarm system, the inspection of the fire main engine power supply, and the failure of the fire main engine grounding circuit.
2. Hydrant system (1) Start the fire pump test every month, and start the fire hydrant button linkage pump test.
(2) Check all the control valves on the system every month to ensure that the control valves are in normal working condition.
(3) Fire hydrants are checked monthly and problems are found.
(4) Hydrostatic pressure tests are conducted on the most adverse point fire hydrant every quarter.
(5) Inspect the equipment such as water guns and hoses inside the indoor fire hydrant box every six months, and notify the user of any problems found.
(6) Check the interface and accessories of the pump adapter each year.
(7) Check the effluent status of fire hydrants on an annual basis Check the hydrants at key locations every year.
3. Automatic Sprinkler System (1) Check the water source control valve and alarm valve group every month to ensure that the system valves are in working condition.
(2) The spray pump is tested once a month for start-up operation.
(3) Start the solenoid valve once every month. When the malfunction occurs, immediately notify your organization of the replacement.
(4) Visual inspection of the nozzles every month revealed that abnormal nozzles were promptly replaced. When the nozzles had foreign objects, they were promptly removed.
(5) Perform a discharge test on the discharge test valve next to the wet alarm valve every quarter to verify the water supply capacity of the wet alarm valve.
(6) The water flow indicator shall be tested with the terminal water test device every six months.
(7) Check and maintain the interface and accessories of the pump adapter each year.
(8) Annually check the fire fighting water level of fire fighting water tanks, fire fighting water tanks and fire fighting water supply equipment, and the pressure of fire fighting pressure water supply equipment. If any problems are found, assist your organization in timely manner.
4. Gas Extinguishing System (1) Check the maintenance gas control panel to ensure normal operation.
(2) Check whether the pressure of the gas cylinder meets the specification and whether there is any leakage.
(3) Check if the test manual and automatic bleeder are normal.
(4) Simultaneous operation of the smoke and temperature detectors in the simulated automatic alarm system checks whether the solenoid valve of the gas cylinder operates, whether the control panel has a deflation signal, and whether the alarm bell or the buzzer operates.
(5) Check the function of the control panel and the cylinder pressure every month.
(6) Check the test manual and automatic bleeder every quarter.
(7) Simulate smoke and temperature detectors in each quarter, whether there is air release signal, and whether the bell or buzzer is sensitive.
5, fire partition (1) Check the integrity of wooden fire doors, fire shutter doors, electric fire doors, etc. every week.
(2) Start or stop the fire shutter door and electric fire door test manually or automatically every quarter. Check the performance.
6. Anti-exhaust smoke system (1) Check weekly whether the air supply, the working environment of the exhaust room and the blower, smoke exhauster, power supply control cabinet, air supply valve, exhaust valve, etc. are in normal and intact condition.
(2) Manually or automatically open the exhaust valve, start/stop blower, and smoke exhauster every six months to check its performance.
(3) Turn off the air conditioning ventilation system and electric fire damper test manually or automatically every six months to check its performance.
7. Emergency lighting evacuation instructions (1) Check weekly whether emergency lighting and evacuation signs for safety exits, evacuation passages, and important locations are in good condition.
(2) Test whether the emergency lights and evacuation indicators can work normally after the power is cut off every month.
8. Others (1) Check the dry powder fire extinguisher's pressure, weight and expiration date every quarter. Spray test if necessary.
(2) Check whether the water collection pit equipment, self-rescue escape equipment, fire-fighting power supply and automatic switching equipment are in normal and intact condition every month.
(3) Examine the switching function of the end of fire power supply on a quarterly basis.
Third, maintenance standards
1, to ensure the normal operation of the system.
2. The quality of maintenance must comply with the requirements of the drawings approved by both parties and meet the requirements of the current fire code.
3. When the equipment fails, our company receives the failure information or receives notification from the user within 12 hours to send the person to the site. Within 24 hours, the failure is repaired. If there are no accessories, report to your organization in a timely manner and take effective emergency measures to prevent accidents.
4. Provide detailed monthly inspections, quarterly inspections, and annual test reports to facilitate your organization's filing.
IV. Inspection and maintenance service methods for building firefighting facilities During the maintenance period, the equipment within the maintenance scope jointly confirmed by both parties shall be inspected, repaired and maintained by our company as required. The materials, components and accessories that are replaced during the maintenance period shall be borne by your organization.
Chinese name fire protection and maintenance type of fire protection system to play a normal function to ensure the normal operation of fire fighting equipment in accordance with the "Fire Law"
Contents Existence Role Relevant information Specific role Inspection content Daily maintenance and emergency maintenance Service content Maintenance plan Fire protection preservation Fire safety maintenance Related information The fire protection system is a guarantee for the normal production, work and life safety of each unit, according to the Ministry of Public Security. In the spirit of the [1996] No. 21 “Notice on Grasping the Establishment and Implementation of the Inspection and Maintenance Management System for Building Fire Protection Facilities†and the Beijing Municipal Government’s directive No. 143 “Beijing Municipal Fire Safety Responsibility Supervision and Management Measuresâ€, the firefighting facilities must be regular Maintenance, maintenance, and discovery of faults will be promptly removed to ensure that the fire protection facilities can operate normally and that they can play their effective safety early warning functions to protect state assets from loss and the safety of the people. We sincerely hope that through common efforts, we can make effective use of it.
Application of automatic fire alarm/fire linkage system is an effective measure for early detection of fire, prevention of fire spread, and reduction of fire hazards, but it is not a matter of installing an automatic fire protection system. In the event of an automatic firefighting system failure, lack of duty-to-service personnel's sense of responsibility, or unattended operation, a disposable cigarette butt and an old or overloaded power line are most likely to cause disaster. A large number of fire cases have proved that the main cause of fires, especially the occurrence of extraordinarily large and vicious fires, is the failure of the fire protection facilities to function or improper handling by the duty personnel. Therefore, to raise awareness of fire safety; make automatic fire fighting system, fire extinguishing system maintenance and maintenance; qualified personnel trained by the two sides responsible for the daily management and operation of fire equipment, is of great significance.
The specific role of fire protection and maintenance along with the further implementation and implementation of the “Fire Lawâ€, especially the past painful lessons from the vicious fire accidents and the serious handling of the responsible persons by the law enforcement agencies, should also enable us to realize that we must ensure the fire fighting equipment. The necessity of normal operation.
Fire Maintenance Inspection Contents Fire Protection Maintenance Daily Maintenance
1, according to the plan every month to sample and test some of the equipment, resulting in all equipment tested in one year. Ensure the normal operation of the equipment.
2. Conduct comprehensive inspections every quarter or half a year (depending on the size of the firefighting project), and identify problems in time.
3. Each year, the company's professional fire detection team conducts detailed fire-fighting tests, including fire-fighting facilities testing and fire-fighting electrical performance testing. Issue a formal inspection report and report to the fire department for record.
4. A professional detector cleaning plant completes cleaning of all detectors every other year.
5. Assist or take full responsibility for the business with the fire department to ensure that no normal work is delayed due to fire problems.
6, depending on the size of the firefighting project, the company can send someone to work resident to assist with daily problems.
Fire Protection Maintenance
1. The company promised to solve the general problem within 24 hours, and serious or urgent problems were solved in the shortest time.
2. Maintain a close cooperation relationship with Party A in an honest service attitude, pay attention to the communication between each other, and negotiate and solve problems.
Fire Protection Service Content
1. Automatic fire alarm system;
2, fire linkage system;
3, automatic sprinkler system;
4, fire hydrant system;
5, gas fire extinguishing system;
6, fire shutter doors;
7, smoke prevention system;
8, fire control room;
9, fire pump.
The Fire Protection Maintenance Project is based on the requirements of the Ministry of Public Security’s “Notice on Accelerating the Establishment and Implementation of a Management and Inspection System for the Inspection and Maintenance of Building Fire Protection Facilities†to ensure the normal operation of the fire protection facilities in the building and ensure the safety of the people and property of the building. Some high-tech networking platforms plan to develop maintenance and repair services for fire protection facilities in the building as follows:
I. Firefighting Facilities Maintenance and Repair Scope The scope of fire automatic alarm system maintenance and repair includes:
1, automatic fire alarm system
2, automatic sprinkler system;
3, gas fire extinguishing system;
4, fire hydrant system;
5. The maintenance and repair of fire-fighting linkage equipment is responsible for the interface to fire-fighting linkage equipment;
6, fire alarm lines and fire-fighting linkage lines and fire linkage power lines, pipeline problems, including short circuit, open circuit.
Our company will repair the faults in the scope of maintenance and repair free of charge manually (such as artificial short circuit, open circuit, equipment damage and other faults are not within the scope of maintenance); if the equipment is aging and damaged and can not be repaired, your organization is responsible for purchasing new ones. The equipment is responsible for the installation.
During the process of system testing and maintenance, your organization shall provide the necessary working environment and personnel cooperation, otherwise there will be unpredictable losses. Our company has the right to refuse payment and provide the above services.
Second, the scope of service of the various subsystems in the fire protection system
1. Automatic fire alarm system (1) Regular inspection and test of the fire alarm system.
a. Test each function of the fire alarm controller.
b. The use of special testing equipment to test the operation of the detector in batches and confirm the lamp display.
c. Perform 1-2 charge-discharge tests on the standby power source each year, and perform 1-3 times of main power and standby power supply automatic switching tests.
(2) Regular inspections and tests are conducted on linkage equipment of fire fighting systems.
a. Each year, fire-fighting linkage tests are conducted twice for control devices such as smoke prevention devices and fire shutter doors.
b. Conduct fire-fighting linkage tests twice a year for fire accidents.
c. Each year, the elevator is forced to stop at the first level of fire-fighting linkage test twice.
d. Conduct intercom call tests twice a year for fire-fighting communications equipment in the fire control room.
e. Annually cut off the non-fire power supply fire-fighting linkage test twice.
(3) Repair the faults of the fire automatic alarm system control lines and linkage lines.
(4) Repair the failure of the fire automatic alarm system.
(5) Inspection and maintenance of the fire communication circuit of the fire automatic alarm system, the inspection of the fire main engine power supply, and the failure of the fire main engine grounding circuit.
2. Hydrant system (1) Start the fire pump test every month, and start the fire hydrant button linkage pump test.
(2) Check all the control valves on the system every month to ensure that the control valves are in normal working condition.
(3) Fire hydrants are checked monthly and problems are found.
(4) Hydrostatic pressure tests are conducted on the most adverse point fire hydrant every quarter.
(5) Inspect the equipment such as water guns and hoses inside the indoor fire hydrant box every six months, and notify the user of any problems found.
(6) Check the interface and accessories of the pump adapter each year.
(7) Check the effluent status of fire hydrants on an annual basis Check the hydrants at key locations every year.
3. Automatic Sprinkler System (1) Check the water source control valve and alarm valve group every month to ensure that the system valves are in working condition.
(2) The spray pump is tested once a month for start-up operation.
(3) Start the solenoid valve once every month. When the malfunction occurs, immediately notify your organization of the replacement.
(4) Visual inspection of the nozzles every month revealed that abnormal nozzles were promptly replaced. When the nozzles had foreign objects, they were promptly removed.
(5) Perform a discharge test on the discharge test valve next to the wet alarm valve every quarter to verify the water supply capacity of the wet alarm valve.
(6) The water flow indicator shall be tested with the terminal water test device every six months.
(7) Check and maintain the interface and accessories of the pump adapter each year.
(8) Annually check the fire fighting water level of fire fighting water tanks, fire fighting water tanks and fire fighting water supply equipment, and the pressure of fire fighting pressure water supply equipment. If any problems are found, assist your organization in timely manner.
4. Gas Extinguishing System (1) Check the maintenance gas control panel to ensure normal operation.
(2) Check whether the pressure of the gas cylinder meets the specification and whether there is any leakage.
(3) Check if the test manual and automatic bleeder are normal.
(4) Simultaneous operation of the smoke and temperature detectors in the simulated automatic alarm system checks whether the solenoid valve of the gas cylinder operates, whether the control panel has a deflation signal, and whether the alarm bell or the buzzer operates.
(5) Check the function of the control panel and the cylinder pressure every month.
(6) Check the test manual and automatic bleeder every quarter.
(7) Simulate smoke and temperature detectors in each quarter, whether there is air release signal, and whether the bell or buzzer is sensitive.
5, fire partition (1) Check the integrity of wooden fire doors, fire shutter doors, electric fire doors, etc. every week.
(2) Start or stop the fire shutter door and electric fire door test manually or automatically every quarter. Check the performance.
6. Anti-exhaust smoke system (1) Check weekly whether the air supply, the working environment of the exhaust room and the blower, smoke exhauster, power supply control cabinet, air supply valve, exhaust valve, etc. are in normal and intact condition.
(2) Manually or automatically open the exhaust valve, start/stop blower, and smoke exhauster every six months to check its performance.
(3) Turn off the air conditioning ventilation system and electric fire damper test manually or automatically every six months to check its performance.
7. Emergency lighting evacuation instructions (1) Check weekly whether emergency lighting and evacuation signs for safety exits, evacuation passages, and important locations are in good condition.
(2) Test whether the emergency lights and evacuation indicators can work normally after the power is cut off every month.
8. Others (1) Check the dry powder fire extinguisher's pressure, weight and expiration date every quarter. Spray test if necessary.
(2) Check whether the water collection pit equipment, self-rescue escape equipment, fire-fighting power supply and automatic switching equipment are in normal and intact condition every month.
(3) Examine the switching function of the end of fire power supply on a quarterly basis.
Third, maintenance standards
1, to ensure the normal operation of the system.
2. The quality of maintenance must comply with the requirements of the drawings approved by both parties and meet the requirements of the current fire code.
3. When the equipment fails, our company receives the failure information or receives notification from the user within 12 hours to send the person to the site. Within 24 hours, the failure is repaired. If there are no accessories, report to your organization in a timely manner and take effective emergency measures to prevent accidents.
4. Provide detailed monthly inspections, quarterly inspections, and annual test reports to facilitate your organization's filing.
IV. Inspection and maintenance service methods for building firefighting facilities During the maintenance period, the equipment within the maintenance scope jointly confirmed by both parties shall be inspected, repaired and maintained by our company as required. The materials, components and accessories that are replaced during the maintenance period shall be borne by your organization.
PVD (physical vapor deposition) coating is a type of Surface Treatment that is used to improve the performance of metal parts, by applying a thin layer of material onto the substrate through a vacuum chamber. This process provides a range of benefits, including increased hardness, improved wear resistance, and enhanced corrosion resistance.
PVD coatings are typically applied to metals such as stainless steel, titanium, and aluminum. They are particularly useful in applications where the substrate is subjected to high wear and tear, as the coatings help to reduce friction and limit the damage caused by abrasion. They are also used in the automotive industry to provide an aesthetic and functional finish to exterior parts.
PVD coatings can be tailored to meet specific application requirements, with a range of coating materials available, including titanium, chromium, and zirconium. These coatings can be deposited in a range of colors, such as black, gold, and silver, giving designers and manufacturers the flexibility to create parts with the desired appearance.
Another key benefit of PVD coating is its durability. The thin layer of coating can offer a long-lasting, high-performance finish, even in harsh or corrosive environments. This makes them particularly useful in outdoor applications, and in settings such as aerospace and medical devices, where reliability and durability are critical.
PVD coating is applied through a series of steps, including cleaning and pre-treatment of the substrate, coating material deposition, and post-treatment, such as polishing or annealing. The result is a thin, uniform layer of coating that provides a range of functional and aesthetic benefits.
In conclusion, PVD coating is a versatile and effective surface treatment for metal parts. It offers a range of benefits, including improved hardness, wear resistance, and corrosion resistance, as well as aesthetic options. By enhancing the performance and durability of metal parts, PVD coating plays an important role in improving the reliability and efficiency of a range of industries and applications.
Pvd Process,Pvd Coating Process,Pvd Metal,Pvd Vacuum Plated
Lizhi Precision Manufacturing Technology Co.,Ltd , https://www.lzautoindust.com