1, the outer surface of the machine must be kept clean. 2, the tank must be washed before adding media. Do not allow the existence of contaminants. 3, the new gear pump oil for the first time, as appropriate, should be replaced every 30 hours. After the second oil change can be gradually extended to 500 hours to change oil. Lubricants in other parts of 56 hours after work should be replaced, then gradually extended to 500 hours. 4, long-term disabled pump. Its interior should be anti-rust treatment. External parts of unpainted parts should be painted anti-rust oil. 5, often pay attention to the pump worm, worm deputy axial clearance, the worm gap is 0.04-0.07mm, worm gear O. 05-O. 10mm, if does not conform to this value, can adjust the screw clearance through the worm screw, adjust the worm gear gap with a paper pad. 6, in the ambient temperature below 0 degrees using the working medium is water, antifreeze should be added, it is recommended to use denatured alcohol as antifreeze.
The classic design of the Peristaltic Pump head has strong chemical resistance, stable performance, wide flow range, stronger practicability, convenient operation and wide application.
Our main products include micro pumps, pump control systems, micro peristaltic pumps, micro diaphragm pumps, vacuum pumps and accessories. All products can be customized according to your special requirements. Our products are widely used in medical machinery, Laboratory equipment, water treatment, printing, automotive products, etc.
Multi-channel peristaltic pump head,Micro peristaltic pump head,Mini peristaltic pump head
Changzhou Yuanwang Fluid Technology Co., Ltd. , https://www.ywfluid.com