Composite floor installation process Raiders!

What we are talking about today is the laying process of laminate flooring. First of all, what is a composite floor? Composite wood flooring is crushed after the logs, add plastic, preservatives, additives, heat press high temperature and high pressure processing, it broke the physical structure of the logs, to overcome the stability of logs Poor sexual weakness. Composite flooring has high strength, uniform specifications, high wear-resistance coefficient, anti-corrosion, anti-mite, and good decorative effect. It overcomes problems such as knots, insect eyes, and color differences on the surface of logs.

Here we will talk about the main installation sequence of composite wood flooring:

First, clean up the scene

Clean up the construction site, clean up the garbage on the ground, including every corner, the ground sweep is not clean, after the floor under the "rustle" feeling.

Second, ground leveling

Then the ground leveling, the horizontal error can not exceed 2mm, more than if you want to find ways to level. If the ground is uneven, the floor feels bad after the floor is laid. Then, we must trim the edges and corners of the ground or uneven parts of the ground.

Third, laying a moisture barrier

After the floor is cleaned, the moisture-proof layer is laid so that the floor can be protected from dampness. The damp-proof layer should be laid flat and joints should be close together.

Laminate flooring

1 234 Next> Total 4 Pages
Page to page
Function assignPage() { var page = $('#page_val').val(); if (/_\d+\.html$/.test(location.href)) { location.href = location.href.replace( /_\d+\.html/, ((page == 1) && 1? '' : '_' + page) + '.html') } else if(/\/\d+\.html$/.test (location.href)) { location.href = location.href.replace(/(\d+)\.html/, ((page == 1) && 1? '$1' :'$1_' + page) + ' .html') } } $(function(){ $('#page_form').submit(function() { assignPage() return false; }) $('#page_btn').click(function(){ assignPage( ); return false; }) }) See full story

Diamond Wire Saw For Granite

In granite mines, only injection-molded and rubber-injected diamond beaded ropes with or without springs can be used. Diamond beads can be sintered or electroplated, but sintered is mainly used. Generally, there are 32-40 diamond beads per meter. It is suitable for secondary cutting at the initial stage of mining and any angle, but not for block shaping. The largest cutting side reaches 20-500㎡, rarely 300-450㎡, the average production capacity is 1.5㎡/hour-8㎡/hour, the life of diamond beaded rope is 2.5㎡/meter-12㎡/meter on average, diamond The linear speed of the beaded rope is 16-26m/s.


Diamond Wire Saw For Granite,Granite Cutting Saw,Wire Saw For Granite Cutting,Wire Saw For Granite Quarry

Jiangyin Baoneng Precision New Material Co.,LTD , https://www.baonengwire.com