1, countertop
The countertops are commonplaces in everyday life, so remember to be careful during the acceptance process. Anything that is out of standard will add a lot of trouble to your daily life. The combination of the countertop and the floor cabinet should be stable, and there should be no looseness to ensure a good level of level after installation. If the countertop is artificial stone, the artificial stone countertop should also be seamlessly spliced. The table top is smooth and smooth, ensuring that there are no obvious scratches. The gap between the tile wall and the back water should be less than 3mm, and then sealed with a sealant.
2, the ground cabinet
The specific location of the cabinet must be strictly in accordance with the design drawings to install, do not arbitrarily change the position of the cabinet, after all, the installation of the cabinet is made after many measurements and planning layout, random orientation will lead to the layout of the entire kitchen Affected. Check whether the outer surface of the cabinet is damaged by any scratches, indentations, etc., whether the door switch is intact, whether the height of the handle is uniform, whether there is obvious clearance when closing, and if it is a cabinet with a sink, the bottom plate should be waterproof. Aluminum foil. Use a vertical measuring instrument to check the vertical and horizontal level of the cabinet to prevent the cabinet from shifting.
3, hanging cabinet
Regarding the installation of the hanging cabinet, it must be firm. Pay attention to avoid the tilting phenomenon. The screw at the joint with the wall must be larger than M8, so as to ensure the load capacity of the hanging cabinet is sufficient. For other considerations, please refer to the cabinet.
4, hardware
At the time of acceptance, the hardware accessories are very important. It is necessary to check whether the brand and the style are the previously agreed styles. It is prevented from being exchanged. For the requirements of hardware accessories, as long as it is ensured, it cannot be obviously sharp, high quality, anti-corrosion oxidation, strong and durable. In the hardware accessories, the acceptance of the drawer drawer is particularly important. To ensure a firm installation, it must be verified by multiple switches to ensure smoothness and no unnecessary sound. The gap of the drawer must be even. If the basket can be closed automatically after pulling 20mm, it proves that the weighing ability is good.
5, other
The installation of the cabinet also includes the installation of the sink and the stove. The specific size of the sink and the stove should be properly installed according to the size of the cabinet. The fitting of the sink and the counter must be sealed with glue. The installation should be secure, and the pipes and connections should be clear to ensure no water leakage. Regarding the range hood, it is necessary to adjust the position according to the specific size of the cabinet.
Jc001.load('news_ads'); jc001.newsAds.prints("5")
solar led string ,solar holiday light .solar decoration lamp,xmas tree light
Shenzhen You&My Electronic Technology Co., Ltd , https://www.youmysolarlight.com