When choosing a solid wood door, we need to focus on the process effect of its paint. For solid wood doors, the quality of the paint and the effect of the construction will affect its future service life, so when we are shopping It is necessary to draw attention, the following Jiuzheng Home Network Xiaobian to share with you how to distinguish the quality of the paint process of solid wood doors.
Paint as a post-process of solid wood door processing, its pros and cons directly affect the final use effect. At the same time, the cost of paint is also one of the largest parts of the cost of wooden doors. The types of paints are broadly classified into phenolic paints, alkyd paints, polyurethane paints, nitrocellulose paints, polyester paints and PU paints. Among them, phenolic paint and alkyd paint are basically eliminated in the decoration due to the poor texture and adhesion of the paint film. A large number of PU paints used in lacquer, polyester paint and high-grade furniture are used. Nitrocellulose lacquer is widely used because of its simple construction and suitable for manual operation, but its paint film is thin, the hand feel is not good, and the effect is not satisfactory.
Due to the cost processing methods and equipment problems, 90% of the solid wood doors on the market currently use polyester paint, while a few manufacturers use PU paint. In general, polyester paints and PU paints have to go through six processes, such as color finding, three bottoms and two sides. Some brands increase the curing and waxing process.
Therefore, when choosing a solid wood door, paint is one of the factors that must be considered. It directly affects the texture, feel, moisture, environmental protection, durability, and yellowing resistance. In addition to the paint, we can check the thickness of the solid wood door. We can look at the thickness of the door. You can also tap the door by hand. If the sound is even and dull, the door is of good quality. In addition, the pattern of the surface of the solid wood door is very irregular, and if the door surface is smooth and neat, it is often not a real solid wood door.
Cordless Grinder,Angle Grinder Cutter,Variable Speed Grinder,Polisher Angle Grinder
ZHENGYANG TECHNOLOGY CO.,LTD , https://www.supraone.com