Photoelectric conversion efficiency
η% An important factor in evaluating the quality of a solar cell.
At present: laboratory η ≈ 24%, industrialization: η ≈ 15%.
Single cell voltage
V: 0.4V - 0.6V is determined by the physical properties of the material.
Fill factor FF%
An important factor in assessing the load capacity of solar cells. FF=(Im×Vm)/(Isc×Voc)
Where: Isc - short circuit current, Voc - open circuit voltage, Im - optimal operating current, Vm - optimal operating voltage;
Standard light intensity
AM1.5 light intensity, 1000W/m2, t = 25°C;
Effect of temperature on battery properties
For example, under standard conditions, the AM1.5 light intensity, t=25°C, the output power of a panel is measured to be 100Wp. If the battery temperature rises to 45°C, the output power of the panel is less than 100Wp.
Applications:
Applications include a variety of high, medium and low cables, steel cord , medical wire, superconducting wire , stranding and spring wire. Using different types of dies for the same type of wire can show different results in terms of die wear and usage time.
BOHONG offers a customized consultation service to provide customers with the most suitable Wire Drawing dies with guaranteed work efficiency.
High Quality Semi-Finished Dies,Semi-Finished Dies For Wire Drawing,New Product Semi Finished,Wire Drawing Die Cores
Henan Bohong New Material Co., Ltd , https://www.bohongpcd.com