First talk about the tires in the tractor digging machine:
Tire pressure is directly related to the safety performance of digging machine tires. Too high or too low tire pressure can cause bad results. Summer temperatures are high, tire pressure should be lower, winter temperatures are low, and tire pressure should be sufficient. Also check the cracking of the tire. If there is a safety hazard, replace the tire in time. When selecting a new tire, it should be consistent with the original tire model of the digger.
In fact, check the lubricating oil level used by the tractor digging machine. The tractor digging machine must check the height of the lubricating oil before each operation. If the digging machine carries out a minor fault inspection in the project, the engine should be turned off, after a period of time, Wait until the lubricating oil flows back to the oil pan. During the inspection, the digging machine should be stopped on a parallel ground. Then, dip the oil dipstick and clean it with a clean cloth. Reinsert the oil dipstick and pull the dipstick again. The liquid level is between MAX and MIN. The minimum and maximum mark difference is 1. 0, when the liquid level is lower than MIN, it should be added in time.
Furthermore, if the brake fluid is replaced and the tractor digging machine is replaced, if there is less brake fluid, it should be added. Brake fluid is toxic and corrosive. It cannot touch the paint. At the same time, it has strong moisture absorption and can absorb the moisture in the surrounding air. Therefore, brake fluid should be changed every two years.
Finally, if the gasoline filter is found to be poorly supplied by the digging machine, it shall promptly check whether the fuel filter is clogged and if it is found to be blocked, it shall be promptly replaced.
Tire pressure is directly related to the safety performance of digging machine tires. Too high or too low tire pressure can cause bad results. Summer temperatures are high, tire pressure should be lower, winter temperatures are low, and tire pressure should be sufficient. Also check the cracking of the tire. If there is a safety hazard, replace the tire in time. When selecting a new tire, it should be consistent with the original tire model of the digger.
In fact, check the lubricating oil level used by the tractor digging machine. The tractor digging machine must check the height of the lubricating oil before each operation. If the digging machine carries out a minor fault inspection in the project, the engine should be turned off, after a period of time, Wait until the lubricating oil flows back to the oil pan. During the inspection, the digging machine should be stopped on a parallel ground. Then, dip the oil dipstick and clean it with a clean cloth. Reinsert the oil dipstick and pull the dipstick again. The liquid level is between MAX and MIN. The minimum and maximum mark difference is 1. 0, when the liquid level is lower than MIN, it should be added in time.
Furthermore, if the brake fluid is replaced and the tractor digging machine is replaced, if there is less brake fluid, it should be added. Brake fluid is toxic and corrosive. It cannot touch the paint. At the same time, it has strong moisture absorption and can absorb the moisture in the surrounding air. Therefore, brake fluid should be changed every two years.
Finally, if the gasoline filter is found to be poorly supplied by the digging machine, it shall promptly check whether the fuel filter is clogged and if it is found to be blocked, it shall be promptly replaced.
Back Cut Saw,Back Saw Tool,Back Hand Saw,Miter Back Saw
ZHOUSHAN CHUNLEI HACKSAW CO.,LTD , https://www.bailei.com